User manual WHIRLPOOL CLDW 60 FD INSTRUCTION FOR USE

[. . . ] CLDW 60 FD- 04075240 User and maintenance manual ENGLISH ENGLISH CONTENTS Getting familiar with your machine . 4 • Conformity with the standards and Test data . 4 Safety information and Recommendations . 5 • Items not suitable for dishwashing . [. . . ] For this reason, your machine is equipped with a system that reduces the hardness in mains water supply. The washing effectiveness will increase when the system is correctly set. To find out the water hardness level of water in your area, contact your local water board or determine water hardness level by using the test strip(if available). Open the testing strip. Keep the testing strip in water for 1 sec. Shake the testing strip after taking it out of water. Make your machine’s water hardness setting according to the result obtained through the testing strip. No Lime Very low lime content Low lime content Medium lime content Lime content High Lime content Adjusting salt consumption Table of Water Hardness Level Settings If the hardness of the water you use is above 90 dF (French hardness) or if you are using well water; you are recommended to use filter and water refinement devices. NOTE: Hardness level is adjusted to level 3 as a factory setting. 9 ENGLISH Adjust the water softener according to how hard your tap water is. Press the program selector button and keep it pressed down. (3) Meanwhile, energise the machine by pressing the Power On/Off button. (1) Keep Start/Pause keys press until the leds “P1-P2-P3-P4-P5-end of program indicator” are on and off. (3) After the leds ” P1-P2-P3-P4-P5-end of program indicator ” have flashed (2) , release the program selector button . (3) Your machine displays the latest entered water hardness setting. You can adjust the levels by programme selector button (3) according to Table of Water Hardness Level Settings. After adjusting the water hardness level , press on/off button to save the settings in memory. (1) 10 ENGLISH Detergent usage Use a detergent specifically designed for use in domestic dishwashers. You can find powder, gel, and tablet detergents in the market that have been designed for household dishwashers. Detergent should be put into the compartment prior to starting the machine. Keep your detergents in cool, dry places out of reach of your children. Do not fill detergent into the detergent compartment more than required; otherwise it may cause scratches on your glasses as well as lead to a poorly dissolved detergent. Should you need more information concerning the detergent you will use, contact detergent manufacturers directly. Filling the detergent compartment Push the latch to open the detergent container as shown in the image. It is possible to measure the right detergent amount using these lines. Detergent pod can take totally 40 cm3 detergent. Open the dishwasher detergent and pour into the larger compartment b 25 cm3 if your dishes are heavily soiled or 15 cm3 if they are less soiled. 2 If your dishes have been kept dirty for a very long time, if there are dried food wastes on them, and if you have overly loaded the dishwasher, pour a 5 cm3 detergent into the prewash compartment and start your machine. You may have to add more detergent into your machine, depending on the degree of soil and on the water hardness level in your area. [. . . ] • Water softener system setting is at a very low level. • Salt compartment cap not closed well. If the dishes won't dry up • A programme without a dry operation selected. • Rinse aid dosage set too low • Dishes unloaded too fast. [. . . ]