User manual WHIRLPOOL DDGI 3610 IN INSTRUCTION FOR USE

[. . . ] The wall/ceiling must be strong enough to take the weight of the hood. Disconnect the power supply at the home main switch during electrical connections. Adjust the extension of the hood support structure, as the final height of the hood depends on this. Note: In some cases the top section of the truss is fixed to the bottom section with 1 or more screws. [. . . ] Remove the filter holder by turning the knobs 90°. Fit the carbon filter “i” in the filter holder “h”. Reverse the above procedure to re-fit the filter holder and grease filter. Grease filter Grease filter release handle Halogen bulb Steam deflector Telescopic flue Air outlet (for filter version only) Grease filters: a Metal grease filters have an unlimited life and should be washed once a month either by hand or in a dishwasher at a low temperature and with a short cycle. Washing in a dishwasher can cause grease filters to turn white, but this in no way affects efficiency. Press the handle to remove the filter b. Wash the filter and leave it to dry, proceeding in reverse order to refit it. Halogen lamps: Use a small screwdriver or other suitable tool to prise off the cover. (12V-G4) halogen lamps, taking care not to touch them with hands. b 5019 418 33319 D GB F NL E P I GR SAFEGUARDING THE ENVIRONMENT 1. Packing Packaging materials are 100% recyclable and are marked with the recycling symbol . Dispose of the appliance in conformity with local environmental regulations. packaging materials (plastic bags , polystyrene , etc. ) can be dangerous for children and should be kept well out of their reach. Product This appliance is marked according to the European directive 2002/ 96/EC, Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is scrapped suitably, you can help prevent potentially damaging consequences for the environment and health. The symbol on the product or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to a suitable collection centre for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For further information on the treatment, recovery and recycling of this product, contact the competent local office, the household waste collection service or the shop where you purchased the appliance. Electrical connections The mains power supply must match the voltage given on the dataplate located inside the hood. If provided with a plug, connect the hood to a power socket complying with current regulations and located in an accessible area. If it does not have a plug (direct connection to the power supply) or if the socket is not in an accessible place, fit a suitable double-pole switch that ensures complete disconnection from the power supply in category III overvoltage conditions, complying with the installation rules. [. . . ] The hood is not extracting enough: • Is the right speed selected?€ Do the filters need cleaning or changing?The light does not work: • Does the lamp need replacing?Check to see if you can solve the problem yourself (see “Troubleshooting guide”). [. . . ]