User manual WHIRLPOOL DEMO WBV3387 IX PRODUCT FICHE

[. . . ] It is advisable to keep the fan active, so that the "6th Sense Fresh Control" function can work properly and also when the ambient air temperature is above 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions. Note: Do not obstruct the air intake area with food items. To guarantee the right performance at low ambient temperature (colder than 18C) and to minimize Energy Consumption, turn off the fan. To turn off the fan press the button (2a). [. . . ] All the icons turn off except On/Stand-by icon back light to indicate that the appliance is in Stand-by. When the appliance is in Stand-by, the light inside the refrigerator compartment does not work. Remember that this operation does not disconnect the appliance from the power supply. To switch the appliance on again, simply press the On/Stand-By button. Fridge Temperature To adjust the Fridge Temperature, press the Temperature button. Is used to set desired temperature level, from warmest through lower to coldest . Pressing pushbutton set-point will change cyclically. Temperature set-point is done for both compartments at one time – fridge and freezer. At first plug-in of appliance factory set-point is chosen – medium position. Following table shows set-points level: high temp. low temp. GB Eco Night Eco Night function allows to concentrate the energy consumption of the product during off-peak time (usually coinciding with night time), when energy is available in large quantity and it costs less than during the day (only in specific countries using multiple-rate system based on off-peak times - check your rate plan with your utility company). Press the Fast Cool button to activate/deactivate Fast Cool function. When activated, the Fast Cool icon will be turned on. The function is automatically disabled after 6 hours, or can be manually disabled by pressing again the Fast Cool button. Note: - Fast Cool function should be also switched ON before placing fresh food to be frozen in the freezer compartment, in order to maximize the freezing capacity. D GB F NL E P I GR S N PRODUCT SHEET Fresh Control" icon remaining visible. To deactivate the function, press Temperature and Fast Cool buttons at the same time for 3 seconds until the acoustic signal sounds. The display will come back to the normal visualization. Smart Displayfunction is automatically disabled after Black-out or any Failure alarm appearance. It is important to remember that this function does not disconnect the appliance from the power supply. GB Key Lock This function prevents anyone from inadvertently changing settings or switching off the appliance. To lock the keys, press Reset button for 3 seconds until the display shows the Key Lock icon: an acoustic signal confirms the function has been selected. To unlock the keys, follow the same procedure until the Key Lock icon switches off. MALFUNCTION AND ALARM INDICATIONS: Operation Alarms In the event of operation alarms, they will also be displayed in the Temperature LEDs, (e. g. Failure1, Failure 2, etc. . . ) call After-sales Service and specify the alarm code. [. . . ] Led flashing x2 x3 x6 DOOR OPEN ALARM The Door Open icon and Alarm icon lights up blinking and the acoustic alarm sounds. The alarm is activated when the refrigerator's door is left open for more than 2 minutes. Close the door to disengage the alarm, or press once Reset button to mute the acoustic alarm for 2 minutes. If the door is not closed, the acoustic alarm will sound again after two minutes. [. . . ]