User manual WHIRLPOOL DI414 PROGRAM CHART

[. . . ] Values may vary in relation to usage, e. g. : different loads, water temperatures - above or below 15°C - as well as water hardness and power supply voltage, etc. 5019 696 93139 (We reserve the right to make technical modifications) CAP/I/FD/GB How to use the appliance Further indications are given in the single chapters and in the user instructions. Open the door, switch on the appliance Press the ON button. Large compartment A: How to fill the detergent dispenser With each wash cycle. Small compartment B: For programmes with pre-wash only. A B C Check the rinse aid level Mechanical indicator C. Electric indicator on control panel (if provided). Check the regeneration salt level On models with water softener system only. [. . . ] Unload the appliance, starting from the lower rack. Switch off the appliance Turn off the water tap, unload the racks CAP/II/FD/GB Dishwasher loading instructions and racks provided Upper rack: Fold down glass holder (A): Depending on the position, for example small or long-stemmed glasses. Crockery holders (B): Depending on the position, for example plates, cups and long-stemmed glasses. Lower rack: Plate holders (C). Cutlery basket (D): The cutlery basket can be removed to increase available space. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the handles positioned upwards. Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. What to do if. . . If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see also the corresponding chapter in the user instructions). Problem The appliance is not working Cause • No water supply. • The appliance does not load sufficient water. • Open the tap. Remedy • Clean the water supply tap filter. • Ensure there are no kinks in the water hose. • • • • Insert the plug into the mains socket. Check the domestic circuit fuse. • Starting the selected programme. • The programme can be set to “0” to start. • Arrange crockery so that items do not touch each other. • Follow recommended detergent dosage. • Select a more intense wash cycle. • The spray arms must be able to turn freely. • Remove any impurities obstructing the water flow *. If crockery is not perfectly dry If crockery is not perfectly clean • Insufficient rinse aid. • The water jet does not reach the crockery. • Spray arm nozzles clogged. • Incorrect detergent/detergent too old. [. . . ] Select a new programme and press the Start button again. • Call the After-Sales Service. • Indicator F. . . (if provided). If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water supply tap, then call our After-Sales Service (see guarantee). [. . . ]