User manual WHIRLPOOL DLC 8100 INSTRUCTION FOR USE

[. . . ] Normally soiled and sweaty sportswear made of cotton jersey or microfibres. This programme includes a prewash cycle – add detergent also to the prewash chamber. Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc. ) or their blends with cotton. Cotton 95 °C Cotton 40 - 60 °C Sport 30 °C Synthetics 30 - 40 - 60 °C Delicates 30 - 40 °C Daily load 40 °C Quick wash 30 °C Wool cold - 40 °C EcoCotton 40 - 60 °C Rinse & Spin Spin Drain 8. 0 95 °C 8. 0 40 - 60 °C 3. 0 30 °C 3. 0 30 - 40 - 60 °C 1. 5 ❉ ❉ ❉ ❉ ❉ — — — — — — — Yes ❉ ❉ — ❉ ❉ ❉ ❉ ❉ ❉ ❉ — — — ❉ ❉ ❉ — — — — — — — — ❉ ❉ — ❉ ❉ — — — — — — — ❉ ❉ ❉ ❉ — ❉ — — ❉ ❉ — — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ — ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ max. Yes max. Yes max. Yes max. 30 - 40 °C Curtains and delicate clothing, dresses, skirts, shirts and blouses. Yes 1000 1) 4. 0 40 °C 3. 0 30 °C 1. 0 - 40 °C 8. 0 40 - 60 °C Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends. Make sure to wash only similar colours together in one wash load. [. . . ] If spin speed “0” is selected, the final spinning is cancelled and the water is drained only. However, intermediate spin phases remain during rinse. to start draining. FAILURE INDICATORS If one of the failure indicators blinks, consult the “Troubleshooting Guide” in your Instructions for Use. “Water tap closed”: no or not sufficient inlet water. “Service”: failure or malfunction of an electrical component. “Clean pump”: waste water is not pumped out. PROGRAMME END START DELAY The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay”. • • • • • Select programme, temperature and options. Press the “Start delay” button to select a delay time of 1, 3, 6, 9 or 12 hours. Press the “Start/Pause” button . The delay time indicator goes off when the programme starts and it is replaced by the programme flow bar indication. Once having pressed the “Start/Pause” button , the delay 2. : time can be changed by pressing again the “Start delay” button. To cancel the “Start delay” . . . before you press the “Start/Pause” button • the “Reset” button . : Turn the programme selector to another position or press 1. Press the “Start/Pause” button programme. Select the new programme and, if you want, another spin speed and any options. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. The “Door open” indicator shows “End”. Turn the programme selector to the “Off/O” position. [. . . ] Particularly suitable for areas with very soft water, washing baby linen and helping people with allergies. . . . after having pressed the “Start/Pause” button • Press the “Start/Pause” button delay disappears from the display. SELECT ANY DESIRED OPTION Push the button of any option desired - the indicator lights up. If the combination programme/option or option/option is not possible, the indicator switches off automatically. “Rapid” button • • Enables quicker washing by shortening the programme duration. Recommendable for only lightly soiled laundry. • - the selected start RESET A RUNNING PROGRAMME BEFORE THE END The “Reset” button • cancels a programme before the end. [. . . ]