User manual WHIRLPOOL DO 905 PROGRAM CHART

[. . . ] At the end of the specified time the oven will switch off automatically. (The maximum programmed cooking time is 3 hours and 59 minutes for all functions, with the exception of the MLTF function (Heat Maintenance) for which it is 9 hours and 59 minutes). After selecting a function and a temperature or grill level: 1. Press button 2 until the display shows a flashing next to the symbol and “0:00” appears. [. . . ] Once the food is cooked: • Switch off the oven by turning knob 1 back to “0”. General remarks: • • • If the position of knob 1 is changed while cooking is in progress, all selected options are cancelled. Keeping button 2 down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons. The acoustic signal is enabled again by pressing button 2 for 5 seconds. For safety reasons, after 5 hours of continuous operation the oven will switch off automatically (except for the oven light and MLTF functions). 5019 610 54151/A SELECTING A TIME BY WHICH THE COOKING MUST BE COMPLETED (Using this function it is possible to program the oven to switch on at a specified time and have it switched off automatically at another defined time. ) For example: if the time is 9:00 am, it is possible to switch on the oven for 45 minutes in such a way that it will switch off at 12:30 pm; the maximum programmed time is 23 hours and 59 minutes). After selecting a function and a temperature or a grill level: next to the symbol and “0:00” appears. Press button 2 until the display shows a flashing 2. Select the cooking time by turning knob 3: the display will show the selected time (flashing) (e. g. : 45 minutes). will flash next to the symbol and the display will show 3. Press button 2 to confirm the selection: the indicator the time of the day (e. g. : 9:00 + 45 minutes = 9:45). Select the time at which the oven should switch off, turning knob 3 (e. g. : 12:30). Press button 2 until the time of day is shown again (in the case of the example, 9:00), or wait 30 seconds to have the value automatically accepted. The oven will switch on at a time that is the switch-off time minus cooking time: (in the case of the example: 11. 45). The display will show the indicators flashing next to the symbols together with the time of day. • To verify the chosen temperature or grill level, turn knob 3 by one click. • To verify or modify both the cooking time (45 minutes) and the switch-off time (12:30), press button 2. • on the display DO NOT flash next to symbols When pressing button 2, if the indicators function selected via knob 1, the special functions are NOT available. , then for the After selecting a function, a temperature, a cooking time or the time at which the oven should switch off: : To select the “Browning” special function flashing next to the symbol 1. Press button 2 until the display shows the indicator 2. Turn knob 3 to select the degree of browning: 1, 2 or 3. Press button 2 twice or wait 30 seconds to have the value accepted automatically. and “0” appears. Once the food is cooked: ” and the oven switches off automatically. The oven light An audio signal begins, the display shows the message “ remains on for 10 minutes. • Press button 2 to stop the audio signal and switch off the light. • Turn knob 1 back to “0”. After selecting a function, a temperature, a cooking time or the time at which the oven should switch off: To select the “Heat Maintenance” special function flashing next to the symbol 1. Press button 2 until the display shows the indicator 2. [. . . ] Programming the special functions These functions are available only when programming cooking time or switch-off time. The two functions can be programmed together or separately. N. B. : - The “Heat Maintenance” special function is available and can be used at the end of the following functions: Static, Pastry, Turbofan, Fan and Booster. - The “Browning” special function is available and can be used after programming Static, Fan and Booster functions. flashing next to the symbol . [. . . ]