User manual WHIRLPOOL DPA 26/2 AL PRODUCT FICHE

[. . . ] Notes: - Depending on the model the number and type of accessories may vary. - In case it'll have a flap, please remember that to maximize the storage volume it's suggested to remove it. - All shelves and door trays are removable. Freezer plastic shelf cannot be removed to have a good air flow rate inside freezer compartment. [. . . ] Freezer plastic shelf cannot be removed to have a good air flow rate inside freezer compartment. - The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Temperature setting must consider these factors. - Unless otherwise specified the appliance accessories are not suitable for washing dishwasher. FAN WITH A BUTTON The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. To switch on the fan press the button (1a). It is advisable to activate the fan when the ambient air temperature is over 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions. Note: Do not obstruct the air intake area with food items. The fan will run ONLY when the compressor is in operation. Remember to turn off the fan when there is a lower ambient air temperature. Remember to turn off the fan when there is a lower ambient air temperature. The feature remains active until you deactivate it (or if a blackout occurs, or if the product is switched off). To deactivate the function, press the pushbutton again for 3 secs. When the Night Tariff LED is OFF the function is not active. Note: appliance energy consumption is declared with "NIGHT TARIFF" function disabled. ABNORMAL APPLIANCE OPERATION When the product is plugged in to the mains, during first 10 minutes of its performance, possible temperature sensor failure will be displayed according to following table: Refrigerator Evaporator sensor failure Refrigerator sensor failure Refrigerator & Evaporator sensor failure Legend Led ON Led OFF Fast Cooling The Fast Cooling (yellow LED) will turn on. The function is automatically deactivated after 6 hours. The "Fast cooling" function can be manually deactivated by pressing again the pushbutton. Note: - Fast Cooling function should be also switched ON before placing fresh food to be frozen in the freezer compartment. - Fast Cooling function has to be engaged in order to maximize freezing capacity, thus it has to be engaged before to add fresh food. ECO GREEN This function gives best food preservation performance with the smallest energy consumption possible (around 5-10% less in comparison with the normal settings - middle temperature ) if there is lower amount of food to be preserved in the appliance. When ECO GREEN function is activated only these ECO compartments should be used in order to have the perfect food preservation: - 2 "eco green" shelves in the fridge (with green frames) - 1 "eco green" area above the plastic shelf in freezer compartment To activate the Eco Green function press the pushbutton on the control panel to choose the mid–high temperature, as showed here below Legend Led OFF Led Flashing The appliance will work preserving the food stored, but it is necessary to contact after-sales service and provide alarm code. [. . . ] - Fast Cooling function has to be engaged in order to maximize freezing capacity, thus it has to be engaged before to add fresh food. ECO GREEN This function gives best food preservation performance with the smallest energy consumption possible (around 5-10% less in comparison with the normal settings - middle temperature ) if there is lower amount of food to be preserved in the appliance. When ECO GREEN function is activated only these ECO compartments should be used in order to have the perfect food preservation: - 2 "eco green" shelves in the fridge (with green frames) - 1 "eco green" area above the plastic shelf in freezer compartment To activate the Eco Green function press the pushbutton on the control panel to choose the mid–high temperature, as showed here below Legend Led OFF Led Flashing The appliance will work preserving the food stored, but it is necessary to contact after-sales service and provide alarm code. Note: in case of power failure, appliance goes back to normal operation and previously chosen setpoint is restored. No Frost No Frost freezers provide chilled air circulation around the storage areas and prevent the formation of ice, thereby completely eliminating the need for defrosting. [. . . ]