User manual WHIRLPOOL EDPS 6640 IN INSTRUCTION FOR USE

[. . . ] It the hob has already been on and the cooking zones have not cooled to the appropriate temperature, an Hsymbol is shown on the display for any cookings zones that are still hot. Select the required cooking zone within 25 seconds, by pressing the or keys to switch it on. The cooking zone will stay selected for 6 seconds. After this, you need to select it again by pressing o . [. . . ] To change the special function simply select the required cooking zone and press the relative key for the new special function you want to set. Using the special functions and advanced use of the hob 1. Hold function With the hold function you can temporarily hold the cooking processes currently underway to prevent food from burning or liquids overflowing from pots due to unwanted overboiling. When the hold function is enabled, all cooking areas switched on are brought to the same keep-warm temperature as the special keep-warm function. Enabling and removing the hold function Press the key to enable the hold function. A dot lights up on the key to indicate it has been switched on. Two flashing vertical bars appear on the displays of all cooking zones. If the gentle heat function is being used in one of the cooking zones, the keep-warm temperature will be the same as the gentle heat temperature, given that the latter is the cooler of the two. To switch off the hold function, press the hold key again. All levels previous to the hold function being switched on are restored when the hold function is removed. Any times set using the timer will continue to count down during the entire time the hold function is enabled. The hold function switches off automatically after 2 hours. Child safety function The child safety function blocks all use of the hob to prevent children from using it. Enabling and removing the child safety function To switch on the child safety function, press the button. All hob commands are disactivated with the exception of the child safety key and the on/off key. Control of the hob is blocked at the settings active prior to the child safety function being enabled. Levels or special functions set for cooking zones prior to activation of the child safety function are “frozen” and are not modifiable. If none of the cooking zones are being used, activating the child safety function will switch off the hob. When it is switched back on again, the child safety function remains. Press and hold the key for three seconds to disable it. In the event the hob switches off during a power failure, the child safety function will not be enabled when the hob is switched back on again. Multiple zone function This function switches on the outer rim of the hotplates as well (if available) meaning larger pots can be used with more optimum distribution of the heat provided by the element below the cooking zone. [. . . ] When you press the time-switch key, the time bar display starts to flash. By pressing the or keys to select a cooking zone, one of the dots at the four corners of the timer display lights up to indicate the zone selected. Use the and keys on the timer bar to set the required time. The display will stop flashing after a few seconds meaning the selected cooking zone has been correctly programmed. [. . . ]