User manual WHIRLPOOL EGZ 3401 SW PROGRAM CHART

[. . . ] In this programme, selection of the special options “Prewash”, “Intensive Rinse”and “Easy Ironing” is not possible. If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme. Same as the spin cycle in the “Coloured Cotton” programme. [. . . ] A very gentle spin is used in this programme. Same as the spin cycle in the “Wool” programme. This programme only drains (alternative method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme. 1. 5 1. 0 Yes Yes – – – – h – – – – – – – – 1000 1) 1000 1) – – – – – – – – – – – – – – 3. 0 Yes 1400 1. 0 5. 0 5. 0 1. 5 Yes 20 to 30 20 400 2) 1400 1400 1000 1) – – – – – – – – – – – – – – – – – – – – – – – – – – – For improved garment care spin speed is restricted to 1000 rpm in this programme. For improved garment care spin speed is restricted to 400 rpm in this programme. 5019 401 15012 CONSUMPTION DATA Programme Temperature (°C) White Cotton Coloured cotton Coloured cotton Synthetic 95 60 40 60 Load (kg) 5. 0 5. 0 5. 0 2. 5 Water (l) 44*** 39 39 55 Energy (kWh) 1. 60 0. 95 0. 55 0. 70 Programme duration ** approx. (hours : minutes) 1:55 2:00 1:45 1:30 • If the spin speed “0” is selected, the final spin is cancelled. “Easy Ironing” button • To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme. START DELAY In addition, all programme phases are indicated by the associated lights. After the end of a programme phase the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. particular household conditions and to adapt the programme run time accordingly. ***To reducethe water temperature , some cold water is added at the end of the main wash cycle, before “Start Delay” correction. • Before the “Start Delay” has been started: the pump drains the water out. The preset number of hours can be “Intensive Rinse” button altered by continuously pressing the POUR IN DETERGENT, CLOSE THE • An additional rinse cycle is carried out. DOOR AND SELECT A PROGRAMME • This additional option is particularly The number of hours can be reduced by suitable for areas with very soft water, for first turning the programme selector Add the detergent as described in the chapter washing baby linen and helping people switch to the “Off” position. Then set the “Detergent and Additives” in the booklet. programme again and select the desired 1. Turn the programme selector knob in “Rinse Hold” button number of hours. • The laundry remains in the last rinse • After the “Start Delay” has been started: • The remaining time display shows the water without being spun: discoloration The preset number of hours can be reduced duration of the chosen programme (in of the laundry and additional creasing are by pressing the “Start Delay” button again. hours and minutes) and the pilot lamp prevented. To increase the number of hours above the “Start/Pause” button is • This additional option is particularly preselected, first turn the programme recommended for the programme flashing. [. . . ] selector switch to the “Off” position. The programme sequence indicator and • This additional function is particularly options again and select the desired the indicator with the maximum possible useful if you want to postpone spinning to number of hours. The temperature can be altered by pressing PROGRAMME START Note: The programme has reached the the “+” or “-” button under the “Rinse Hold” when the “Rinse Hold” button corresponding LED display. After you have selected the programme and light flashes. [. . . ]