User manual WHIRLPOOL EGZH 5800 IN INSTALLATION

[. . . ] - Switch the position of the dishes in the oven 10 minutes before the end of cooking time. - Remove the cooked dish and, if necessary, continue cooking the other one for as long as required. FAN FUNCTION Use this function when cooking food on more than one level (e. g. :fish, vegetables, pasta): - Choose foods that require the same cooking time. - Remove the cooked dish and, if necessary, continue cooking the other one for as long as required. Accessories: • Grid • Baking tray • Drip tray • Grease filter GRILL FUNCTION CONTROL PANEL Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts. [. . . ] - The oven door must be closed during the cooking cycle. - Pre-heat the grill for about 5 minutes. - Arrange the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the bottom to reduce smoke and fat spatters. - Turn over the meat about half-way through cooking time. BOTTOM HEATING FUNCTION Use: - To finish baking fruitcakes or cheesecakes. Use the lower heating function for the last 10 or 15 minutes of cooking time. GRILL + FAN Ideal for large joints, pork, chicken and roast beef. - The oven door must be closed during the cooking cycle. - Place the meat on the grid with the drip tray underneath. indicates operation of the minute minder. • This function is independent of oven operation • Press button 1: digits 0:00 are displayed • Press button 5 or 6 to display the desired cooking time. Having released the buttons, or a few seconds afterwards, the actual time and the symbol are displayed. Press button 2: digits 0:00 are displayed; set the desired cooking time with buttons 5 and 6. After a few seconds, the actual time is displayed with AUTO and the symbol both permanently alight. SETTING THE CLOCK, AND SELECTING MANUAL OPERATION • Press button 3 to set the end of cooking time, which is selected using buttons 5 and 6. The symbol will now go out, and reappear again when the oven comes into operation automatically at the start of the programmed duration. Set the oven control knobs to the temperature and functions required. Once the cooking time has elapsed, an acoustic signal indicates that the oven has switched off. The acoustic signal warns that the set time has elapsed. Press button 1 to silence the acoustic signal. PROGRAMMING THE COOKING TIME Press button 2: digits 0:00 are displayed; set the desired cooking time with buttons 5 and 6. After a few seconds, the actual time is displayed with AUTO and the symbol both permanently alight. [. . . ] Press button 1 to silence the acoustic signal. PROGRAMMING THE COOKING TIME Press button 2: digits 0:00 are displayed; set the desired cooking time with buttons 5 and 6. After a few seconds, the actual time is displayed with AUTO and the symbol both permanently alight. • Set the oven control knob to the temperature required: the oven will come into operation immediately. [. . . ]