User manual WHIRLPOOL EINB.BACKOFEN INSTRUCTION FOR USE

[. . . ] Instructions for use General recommendations Installation Electrical connection Energy saving tips Oven accessories Cleaning the oven and its accessories Troubleshooting guide After Sales-Service General recommendations Before using the appliances • To make the most of your new appliances read the users instructions carefully and keep them on hand for consultation in the future. €¢ Remove the cardboard protections and the protective plastic film. €¢ Remove the accessories from the oven and heat it at 200°C for about an hour to eliminate the smell of protective grease and insulating materials. Keep the window open during this procedure. [. . . ] To clean the oven heat it to 200°C when empty and leave it switched on for about an hour. It can be placed in two different ways ( or ) and on any of the runners in the oven. At the end of the cycle, when the oven is cool, use a moist sponge to remove food residues. Do not use detergent or cleaners - risk of damaging the catalytic enamel coating. Spit Use the spit as indicated in the relevant chapter in the Product Description Sheet supplied separately. pan Set Kit The set comprises a grid , a drip tray and one or two tongs . This accessory must be set on the grid and used with the Grill function. Oven functions The functions actually available dependent on the model (see the Product Description Sheet supplied separately) STATIC FUNCTION This function is used to cook food on the same runner level. The function allows temperature control; the temperature can be set in the range of 50° C to 250°C. the default setting is 200°C. €¢ Preheat the oven until the required temperature is reached and place the food into the oven when all the indicators on the scale °C__ are on. €¢ When using this function, it is advisable to put the food in the middle of the oven. GRILL FUNCTION This function is ideal to grill small pieces of meat (steaks, sausages) and for making toast. The function allows five settings, 1, 2, 3, 4, 5, each corresponding to an increased heating level of the heating element at the top. €¢ During cooking, the oven door must be kept closed. €¢ Preheat the oven for 3/5 minutes. €¢ When cooking meat, to avoid spatters of fat and smoke, pour a little water into the drip tray. €¢ Turn the food half-way through grilling time. When this function is selected the spit (if supplied) is also activated. "MLTF" FUNCTION (Heat maintenance) This function keeps one of two temperature levels of temperature (either 35°C or 60°C) inside the oven. €¢ Setting the temperature at 35°C is particularly useful to raise dough for bread and pizza. • The default setting is 35°C. [. . . ] programme P1 allows rapid preheating with an initial temperature of 300°C and a cooking temperature of 240°C. To improve energy saving and avoid wasting electricity, there is no preheating if the oven is already warm, and the cooking temperature is set automatically (240°C). For programmes P2 and P3 the initial temperature is always 220°C. bOOSTER FUNCTION This function allows fast preheating of the oven. [. . . ]