User manual WHIRLPOOL EKV 6740 IN PROGRAM CHART

[. . . ] • Insert the cook hob into the pre-prepared hole ensuring that the clips (A) lodge into the bracket slots provided (C Fig. 4 B) If the worktop is made of marble, ceramic, stone, plastic materials, etc. , order the installation kit, code 4812 310 19277 from an authorized after-sales service. Fig. 5 13 41902019GB. fm Page 14 Wednesday, April 23, 2008 1:00 PM ELECTRICAL CONNECTIONS Electrical connection must be made before connecting the appliance to the electricity supply. The appliance must be installed by a qualified electrician who is fully aware of current safety and installation regulations. [. . . ] Then insert the power supply cable into the cable clamp and connect the wires to the terminal block as indicated in the connection diagram placed close to the terminal block itself. • Secure the power supply cable (B) by means of the cable clamp. • Close the terminal board with the cover (A) securing it with the screw provided. • After the electrical connection, fit the hob from the top and hook it to the support springs, according to the illustration. 14 41902019GB. fm Page 15 Wednesday, April 23, 2008 1:00 PM ENERGY SAVING TIPS • Use pots and pans whose bottom diameter is equal to that of the cooking zone or slightly larger. • Only use flat-bottomed pots and pans. • If possible, keep pot lids on when cooking. with little water in order to cut down cooking time. • A pressure cooker allows you to save even more energy and time. NO! SAFEGUARDING THE ENVIRONMENT 1. Packing • The packaging material can be 100% recycled, as confirmed by the recycling symbol ( ). Products This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. • Do not use the cooktop as a work surface or a support surface. • Do not leave the appliance unattended when frying food -risk of fire. • If the glass ceramic surface should break or crack due to violent impact (falling objects, etc. ) do not use it and call the After-Sales Service immediately. • Do not place food wrapped in aluminium foil, plastic containers or cloths on the hot cooking zones. • Do not drag pans across the glass-ceramic surface - risk of scratches. • Avoid spilling sugar and similar substances on the cooktop. If necessary, clean the cooktop immediately following the care and maintenance instructions in this handbook. • If the hob is fitted with halogen lamps, do not stare at the bulbs directly. HOB ACCESSORIES Child guard accessory AMH 122 This accessory can be obtained from the After-Sales Service under Part N° 4819 310 18436. 16 41902019GB. fm Page 17 Wednesday, April 23, 2008 1:00 PM CARE AND MAINTENANCE OF THE GLASSCERAMIC HOB Clean the cooktop, when it is cool, after each use. This will prevent the build-up of dirt and make cleaning easier. Important: at all costs avoid the use of high pressure water or steam cleaning equipment. • Use a clean cloth, absorbent kitchen wipes and washing up liquid or a specific glass ceramic cleaner. [. . . ] If a cooking zone has been selected and an “F” or an “ER” appear on the display followed by a number, contact the After Sales Service and inform them. - With the exception of the message “F03” or “ER03” that identifies the incorrect cleaning of the controls area. - To solve the problem follow the instruction in the ICleaning and maintenance of the glass-ceramic hobI paragraph. If the hob does not work following intensive use, the hob internal temperature is too high. [. . . ]