User manual WHIRLPOOL ELV 8160/PT PROGRAM CHART

[. . . ] IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: DANGER WARNING Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions: The appliance must be disconnected from the power supply before carrying out any installation work. [. . . ] Remove the screws and relative plates on the right and left with the aid of a coin or tool (Fig. To remove the grilles, lift the up (1) and turn them (2) as shown in Fig. 5 GB16 MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY) 1. Remove the side accessory holder grilles. Pull the heating element out a little (Fig. To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest on the lateral supports. Fig. 7 REPLACING THE OVEN LAMP To replace the rear lamp (if present): 1. Disconnect the oven from the power supply. 8), replace the lamp (see note for lamp type) and screw the lamp cover back on. Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. Angle the wire shelf when it reaches the locking position “B” (Fig. Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. To remove the wire shelf proceed in reverse order. The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface enables the accessories to lock in place. CONTROL PANEL DESCRIPTION 3 4 1 7 2 5 6 8 1. * FUNCTION SELECTOR KNOB: On/off and function selector knob THERMOSTAT KNOB: selecting the temperature CONTROL KNOB FOR FRONT LEFT HOTPLATE CONTROL KNOB FOR REAR LEFT HOTPLATE CONTROL KNOB FOR REAR RIGHT HOTPLATE 0 0 0 1 . . . 10 * * * CONTROL KNOB FOR FRONT RIGHT HOTPLATE 0 1 . . . Press the knobs in the middle and they pop up. THERMOSTAT LED COOKTOP “ON” INDICATOR LIGHT The multizone function can only be switched on for the double and triple hotplates of the cooktop. (See cooktop functions table). OVEN OPERATION • Turn the selector knob to the required function. • Turn the thermostat knob clockwise to the required temperature. The thermostat led lights up, switching off again when the oven reaches the selected temperature. [. . . ] To obtain best results, carefully follow the advice given in the cooking table for the choice of accessories (supplied) to be placed on the various shelves. Cooking different foods at the same time Using the “CONVECTION BAKE” function, you can cook different foods which require the same cooking temperature at the same time (for example: fish and vegetables), using different shelves. Remove the food which requires less cooking time and leave food which requires longer cooking time in the oven. Desserts Cook delicate desserts with the conventional function on one shelf only. Use dark coloured metal cake tins and always position them on the wire shelf supplied. To cook on more than one shelf, select the forced air function and stagger the position of the cake tins on the shelves, aiding optimum circulation of the hot air. [. . . ]