User manual WHIRLPOOL ELVE 8170 IN INSTRUCTION FOR USE

[. . . ] ELVE 8170 Benutzer- und Wartungshandbuch EN User and maintenance manual Manuel d’utilisation et d’entretien Manuale d’uso e manutenzione IT IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: DANGER WARNING Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions: - The appliance must be disconnected from the power supply before carrying out any installation work. [. . . ] Turn the “Browse” knob to display the correct hour. Press the button 3 to confirm; the two minute digits flash on the display. Turn the “Browse” knob to display the correct minutes. To change the time, for example following a power cut, see the next paragraph (SETTINGS). SELECTING COOKING FUNCTIONS 1. 2. Turn the “Functions” knob to the desired function: the cooking settings are shown on the display. If the values shown are those desired, press 3 . To change them, proceed as indicated below. SETTING THE TEMPERATURE/OUTPUT OF THE GRILL To change the temperature or output of the grill, proceed as follows: 1. Turn the “Browse” knob to display the desired value. The oven automatically confirms your selection 10 seconds after the last operation. EN29 FAST PREHEATING 1. 3. Turn the “Functions” knob to the symbol to select the fast preheating function. 4. Confirm by pressing 3 : the settings are shown on the display. If the proposed temperature is that desired, press button 3 . To change the temperature, proceed as described in previous paragraphs. When the set temperature is reached, the corresponding value (e. g. 200°) and an acoustic signal will sound. At the end of preheating, the oven automatically selects the conventional function . At this point food can be placed in the oven for cooking. If you wish to set a different cooking function, turn the “Functions” knob and select the desired function. SETTING COOKING TIME This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by the selected function, after which the oven switches off automatically. 1. Once the temperature is confirmed, the symbol flashes. 2. Turn the adjustment knob to display the desired cooking time. To confirm the cooking time, press button 3 . The oven automatically confirms your selection 10 seconds after the last operation. SETTING END OF COOKING TIME /START DELAYED IMPORTANT: the start delayed setting is not available for the following functions: FAST PREHEATING, BREAD/PIZZA. N. B. : with this setting, the selected temperature is reached in a more gradual way, so cooking times will be slightly longer than stated in the cooking table. The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. [. . . ] Remove the food which requires less cooking time and leave food which requires longer cooking time in the oven. Desserts Cook delicate desserts with the conventional function on one shelf only. Use dark coloured metal cake tins and always position them on the wire shelf supplied. To cook on more than one shelf, select the forced air function and stagger the position of the cake tins on the shelves, aiding optimum circulation of the hot air. To check whether a raising cake is cooked, insert a wooden toothpick into the centre of the cake. [. . . ]