User manual WHIRLPOOL EMVD 7265/BR PROGRAM CHART

[. . . ] IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: DANGER WARNING Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions: The appliance must be disconnected from the power supply before carrying out any installation work. [. . . ] Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. To remove the wire shelf proceed in reverse order. The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface enables the accessories to lock in place. CONTROL PANEL DESCRIPTION 3 4 1 7 8 2 5 6 9 1. * FUNCTION SELECTOR KNOB: On/off and function selector knob THERMOSTAT KNOB: selecting the temperature CONTROL KNOB FOR FRONT LEFT HOTPLATE CONTROL KNOB FOR REAR LEFT HOTPLATE CONTROL KNOB FOR REAR RIGHT HOTPLATE 0 0 0 1 . . . 10 * * * CONTROL KNOB FOR FRONT RIGHT HOTPLATE 0 1 . . . Press the knobs in the middle and they pop up. ELECTRONIC PROGRAMMER THERMOSTAT LED COOKTOP “ON” INDICATOR LIGHT The multizone function can only be switched on for the double and triple hotplates of the cooktop. (See cooktop functions table). OVEN OPERATION • Turn the selector knob to the required function. • Turn the thermostat knob clockwise to the required temperature. The thermostat led lights up, switching off again when the oven reaches the selected temperature. At the end of cooking, turn the knobs to “0”. COOKTOP OPERATION The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function symbols. • Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the instructions supplied with the cooktop). GB20 USING THE ELECTRONIC PROGRAMMER Description of Functions 1. Function selector knob Programming button: (“set”) Confirmation button (“ok”) Buttons for changing time (“-” and “+”) Temperature selection knob 1 2 3 4 5 Display detail A B A. E. Timer Key-lock Temperature indicator Cooking Time End of cooking time C D E Starting the oven When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “ ”. Selecting and changing the clock time 1. Press “-” or “+” to set the time. Press “ok” and “-” or “+” to set the minutes. Press “ok” to confirm the selection. To change the time Keep the “ok” button pressed for 2 seconds. Repeat the steps described above. Selecting the cooking function Turn knob 1 to the chosen function. [. . . ] Use the accessories supplied and preferably dark coloured metal cake tins and oven trays. You can also use pans and accessories in pyrex or stoneware, but bear in mind that cooking times will be slightly longer. To obtain best results, carefully follow the advice given in the cooking table for the choice of accessories (supplied) to be placed on the various shelves. Cooking different foods at the same time Using the “CONVECTION BAKE” function, you can cook different foods which require the same cooking temperature at the same time (for example: fish and vegetables), using different shelves. Remove the food which requires less cooking time and leave food which requires longer cooking time in the oven. Desserts Cook delicate desserts with the conventional function on one shelf only. [. . . ]