User manual WHIRLPOOL EMZ 4466 SW INSTRUCTION FOR USE

[. . . ] - Ideally, the shelf should be on the second runner level when using the static function. STATIC FUNCTION + FAN Use this function when cooking on two different levels. - Oven pre-heating is not necessary (except for pizzas and focaccia). - Switch the position of the dishes in the oven 10 minutes before the end of cooking time. [. . . ] FAN FUNCTION Use this function when cooking food on more than one level (e. g. : fish, vegetables, pasta). - Choose foods that require the same cooking temperature. - Remove the cooked dish and, if necessary, continue cooking the other one for as long as required. BOTTOM HEATING FUNCTION Use: - To finish baking fruitcakes or cheesecakes. Use the lower heating function for the last 10 or 15 minutes of cooking time. Last First Accessories: • Grid • Baking tray • Drip tray CONTROL PANEL 1. Control knob for front, left cooking zone* 0 1 . . . Control knob for rear, left cooking zone* 0 1 . . . Control knob for rear, right cooking zone* 0 1 . . . Control knob for front, right cooking zone* 0 1 . . . Cooktop “ON” indicator light *The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned to their original positions. The cooling fan can run at two speeds: 1) Full speed 2) Reduced speed The fan speed depends on the temperature of the oven and/or cooktop. After the oven and/or the cooktop switch off, the cooling fan may, however, continue to run for a certain time to ensure proper cooling. Important: An optional kit consisting of an oven door glass and of relevant mounting components, is available by the After-Sales Service. The use of the kit reduces the temperature of the outer oven surface and is strongly recommended if there are Kids in the house. Code N°: 4819 310 39186. SWITCHING THE OVEN ON Turn the selector knob to the required symbol. • Turn the thermostat knob clockwise to the required temperature. The red thermostat indicator light switches on. • When the required temperature is reached, the red thermostat indicator light switches off. End of the cooking cycle: • Return the knobs to the OFF position (0-•). 5019 310 53241 COOKTOP FUNCTIONS The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function symbols. KEEP WARM FUNCTION This function uses a low power setting so that food can be kept warm when cooking is finished. [. . . ] Place the pan on the chosen cooking zone. GENTLE HEAT FUNCTION Can be used to raise dough, soften hard butter from the fridge, keep a baby's bottle or a baby food warm, for yoghurt making, melting chocolate, etc. . . This function is available only when the residual heat indicator light is on. Make sure that the relative cooking zone residual heat indicator light is on. [. . . ]