User manual WHIRLPOOL EMZH3463 SW PROGRAM CHART

[. . . ] At the end of the specified time the oven will switch off automatically. (The maximum programmed cooking time is 3 hours and 59 minutes for all functions, with the exception of the MLTF function (Heat Maintenance) for which it is 9 hours and 59 minutes). After selecting a function and a temperature or grill level: 1. Press button 2 until the display shows a flashing next to the symbol and “0:00” appears. [. . . ] The acoustic signal is enabled again by pressing button 2 for 5 seconds. For safety reasons, after 5 hours of continuous operation the oven will switch off automatically (except for the oven light and MLTF functions). 5019 610 54191/A SELECTING A TIME BY WHICH THE COOKING MUST BE COMPLETED (Using this function it is possible to program the oven to switch on at a specified time and have it switched off automatically at another defined time. ) For example: if the time is 9:00 am, it is possible to switch on the oven for 45 minutes in such a way that it will switch off at 12:30 pm; the maximum programmed time is 23 hours and 59 minutes). After selecting a function and a temperature or a grill level: 1. Press button 2 until the display shows a flashing next to the symbol and “0:00” appears. Select the cooking time by turning knob 3: the display will show the selected time (flashing) (e. g. : 45 minutes). Press button 2 to confirm the selection: the indicator will flash next to the symbol and the display will show the time of the day (e. g. : 9:00 + 45 minutes = 9:45). Select the time at which the oven should switch off, turning knob 3 (e. g. : 12:30). Press button 2 until the time of day is shown again (in the case of the example, 9:00), or wait 30 seconds to have the value automatically accepted. The oven will switch on at a time that is the switch-off time minus cooking time: (in the case of the example: 11. 45). The display will show the indicators flashing next to the symbols together with the time of day. • • • To verify the chosen temperature or grill level, turn knob 3 by one click. To verify or modify both the cooking time (45 minutes) and the switch-off time (12:30), press button 2. When the oven switches on: the indicators are shown on the display next to symbols and the set cooking time is shown. • When pressing button 2, if the indicators on the display DO NOT flash next to symbols , then for the function selected via knob 1, the special functions are NOT available. After selecting a function, a temperature, a cooking time or the time at which the oven should switch off: To select the “Browning” special function : flashing next to the symbol and “0” appears. Press button 2 until the display shows the indicator 2. Turn knob 3 to select the degree of browning: 1, 2 or 3. Press button 2 twice or wait 30 seconds to have the value accepted automatically. Once the food is cooked: An audio signal begins, the display shows the message “ ” and the oven switches off automatically. The oven light remains on for 10 minutes. • Press button 2 to stop the audio signal and switch off the light. • Turn knob 1 back to “0”. After selecting a function, a temperature, a cooking time or the time at which the oven should switch off: To select the “Heat Maintenance” special function 1. [. . . ] When the set time has elapsed: • An audio signal begins and the display shows “ ”. The display shows the time of day. SPECIAL FUNCTION • Browning This function allows the browning of food while it is cooked. It is possible to choose one of three levels of browning 1-2-3. • Heat Maintenance function This function keeps the temperature in the oven at 60°C at the end of the cooking cycle, for a maximum of 5 hours. [. . . ]