User manual WHIRLPOOL EPVD 5470 AL PROGRAM CHART

[. . . ] 5. Product description sheet SE NO DK FI Dual ring cooking zone (Lightronic Sense) Ø 210x120, 2100 W (inner 750 W, outer 1350 W) Cooking zone (Lightronic Sense) Ø 145x250, 1800 W (inner 1000 W, outer 800 W) Halogen heating zone (Lightronic Sense) Ø 145, 1200 W Halogen heating zone (Lightronic Sense) Ø 180, 1800 W Display Innovative features of the hob The DISPLAY shows at a glance the chosen power setting and, if applicable, the chosen function. After turning any of the knobs, the PAN DETECTION feature turns on the respective heating zone automatically as soon as a metallic cooking utensil of appropriate size is placed onto that heating zone. [. . . ] In this case the respective heating zone works just like a normal heating zone without pan detection. When finished cooking turn all the knobs back to the "0" position. Important: To avoid permanently damaging the glass-ceramic top, do not use: - Pots with bottoms that are not perfectly flat. Any aesthetic defects (scratches, marks etc. ) must be reported at the time of installation. Dimensions of cooking hob and worktop Ideal Max. 50% No detection No detection The ELECTRONIC CONTROL keeps variations in heating zone temperature to a minimum thus ensuring uniform cooking at all times. The BOIL DRY FUNCTION detects abnormal situations such as when the pan has boiled dry and turns the respective heating zone off automatically. The DIAGNOSTIC SYSTEM continually checks that the hob is working properly and indicates if there is a fault. Display description Dual ring function Pan detection turned off Turbo heat Auto fast boil Gentle heat Alphanumeric DISPLAY Keep hot function The displays on the hob correspond to the chosen control knob settings and selections, which are listed in the hob’s instruction booklet and depend on the features included in the particular version of the hob. 5019 419 61121/C Possible user messages Flashing indicator lamp: Special feature selected. Indicator lamp on continuously: Special feature active. Using the hob • • • Turn the knob (for the cooking zone to be used) clockwise to the desired power level or to the symbol corresponding to the function required. To turn the cooking zone off, turn the knob until the mark is at position “0”. Turbo heat) are explained in the separate product description for the hob. Whilst using the hob and/or the oven the cooling fan works continuously, adjusting its ventilation capacity according to the heat setting selected. “U that moves up and down”: When pan detection is active this display indicates either that there is no cooking utensil placed on the heating zone or the utensil is not positioned properly. With “U at a standstill” the heating zone has been turned off by pan detection and the knob has to be turned back to the “0” position to activate the zone again. After turning the hob and/or oven off, the cooling fan may continue running for a while in order to cool down the appliances and adjacent kitchen fixtures. “Turning pan detection on and off” With this hob, pan detection is usually activated after turning on, although it can still be switched off manually if necessary. [. . . ] After around 5-7 seconds pan detection is activated once again automatically, the function indicator then goes off. Turning it on: Fine adjustment of the heat setting: An additional intermediate heat setting (1. 5) can be selected between control knob settings 1 and 2. 1. Please note: The turning off or turning back on again, where necessary, has to be carried out for each separate heating zone. Turbo heat: The booster function is turned on for fast boiling . Hob still hot warning: The hot hob warning (“H”) stays on after the heating zone has been turned off until the temperature has fallen to a safe level. If any display readout shows an “F” message, please get in touch with after-sales service. [. . . ]