User manual WHIRLPOOL ESN 5460/01 IN PROGRAM CHART

[. . . ] ESN 5460/01 DE FR BE NL PRODUCT DESCRIPTION SHEET OVEN 0 First. . . Last: Runner positions 1. Control panel Cooling fan (not visible) Upper heating element Grill element Oven light Lower heating element (not visible) Oven door hinges Oven cool door Off Oven light OVEN FUNCTIONS BOTTOM HEATING FUNCTION Use: - To finish baking fruitcakes or cheesecakes. - Use the lower heating function for the last 10 or 15 minutes of cooking time. Last First STATIC FUNCTION Use when all the food is on the same runner level. [. . . ] • When the required temperature is reached, the red thermostat indicator light switches off. End of cooking cycle: • Return the knobs to the OFF position (0 - •). 1 Oven functions selector knob 2. Cooktop “ON” indicator light * * * * *The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned to their original positions. N. B. : The cooling fan runs continuously at two different speeds according to the temperature value of the components when the appliances are in use. Full speed: for high temperature of the components. Half speed pulsing: for low temperature of the components. The pulsing speed has to be considered a normal appliance condition at half speed. The fan may continue to run for the time necessary to ensure sufficient cooling of the components and adjacent kitchen units after the appliances have been switched off. 5019 410 53021 COOKTOP FUNCTIONS The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function symbols. KEEP WARM FUNCTION This function uses a low power setting so that food can be kept warm when cooking is finished. To deactivate the Keep Warm function, change the knob position. DUAL ZONE FUNCTION (DEPENDENT ON MODEL) This function is available on the front left and rear left cooking zones. The dual-zone function extends the heated area of the cooktop so that you can use large, oval or rectangular pans. Turn the knob to and wait for the residual heat indicator for the chosen hotplate to start flashing. Select the required power by turning the knob anti-clockwise. The residual heat indicator remains lit to show that the cooktop is switched on. [. . . ] Make sure that the relative cooking zone residual heat indicator light is on. To deactivate the function change the knob position. This symbol does not correspond to any cooktop mode; the heating element is not powered. 5019 410 53021 [. . . ]