User manual WHIRLPOOL ETPV 6950 IN PROGRAM CHART

[. . . ] ETPV 9500 IN GB PRODUCT DESCRIPTION SHEET 1. Front left cooking zone Ø 145mm Rear left double cooking zone Ø 265/170mm 3. [. . . ] Press the corresponding + or - button within 10 seconds to switch on the element to be used. Then adjust the temperature with the +/- buttons. To switch off an element, press the - button until “0” is displayed. The corresponding LED goes off within 10 seconds. The + and - buttons can also be pressed at the same time to switch off an element. To switch off the hob, press the ON/OFF button. If all the elements are set to “0”, the hob will switch off after 10 seconds. Whenever an object is placed on the hob control panel or in case of splashing of liquids (water, milk, etc. ), the hob automatically switches off and a warning buzzer will sound for 3 seconds every 30 seconds, with the letter “F” and “L” appearing on the display. If the hob has elements in the double cooking zone, switch on the second zone by pressing the corresponding symbol for 3 seconds. After switching on the second element, adjust the temperature with the +/- buttons. When an element is switched off and the temperature is higher than 50°C, the LED H (Hot, very hot) next to the + button lights up. The LED H (Hot, very hot) will stay on until the hob has cooled down to a safe temperature. [. . . ] To activate this function, after selecting and pressing the button of a cooking zone, press the Timer button (the numbers 00 will be shown and the letter t will appear on the display of the selected zone), then set the cooking time (from 1 to 99 minutes) with the +/- button. When the set cooking time is up, the Timer will automatically switch off the activated cooking zone and a confirming buzzer will sound for a few seconds. [. . . ]