User manual WHIRLPOOL EV 1240 PROGRAM CHART

[. . . ] made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon). Curtains and delicate clothing, dresses, skirts, shirts and blouses. Slightly to normally soiled textiles made of cotton and/or synthetics. Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton. [. . . ] “Prewash” button • Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximat ely 20 min. “Rapid” button • Enables quicker washing by shortening the programme duration. • Recommendable for small loads or only lightly soiled laundry. “Intensive rinse” button • The amount of water is increased to ensure a more intensive rinse. • This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies. “Rinse hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. • This option is particularly recommended for the “Synthetics”, “Delicates” and “Daily load” programmes. • It is useful if you want to postpone spinning to a later time, or if you want to drain out only. • If you select “Rinse hold”, do not leave items to soak for too long. • As soon as the appliance stops in the rinse hold, the “Anticrease” lamp of the sequence indicator lights up and the lamp next to the “Start(Pause)” button flashes. Terminate the “Rinse hold” option: • Press the “Start(Pause)” button; the programme will terminate automatically with the final spin cycle for the present wash programme. • If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start(Pause)” button. “Variable spin” button • Every programme has a predefined spin speed. • Press the button to set another spin speed. • If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during the rinse. The water is drained out only. START DELAY The “Start delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper. • Select programme, spin speed and options. • Press the “Start delay” button several times to select a delay time of 1, 3, 6, 9 or 12 hours. The corresponding indicator lamp lights up. • Start the countdown of the “Start delay” by pressing “Start(Pause)”. the lamp over the “Start delay” button blinks, and it goes off when the programme starts. • Once having pressed the “Start(Pause)” button, the countdown of the time delay begins. [. . . ] 3. Open lid and drum and unload the machine. 4. Leave the lid open for some time to allow the interior of the machine to dry. CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. 2. 3. Press the “Start(Pause)” button to pause the programme. Select the new programme, any options and another spin speed if you want. [. . . ]