User manual WHIRLPOOL EV 605/1 PROGRAM CHART

[. . . ] • To cook on up to two different shelf levels. • If necessary, switch the positions of the dishes to cook food more evenly. • It is not necessary to preheat the oven (except for pizzas and focaccias). [. . . ] Press “set” (the indicator on the display lights up next to the cooking time symbol ) and, within 8 minutes, proceed to select the desired cooking time using buttons “-” or “+”. Confirm the selection by pressing “ok”; the oven switches on and the display shows the residual cooking time. To change the previous temperature setting, turn knob ᕇ. To return to the residual cooking time, wait 5 seconds. Appearance of on the display: Once the set time has elapsed, an acoustic signal is heard and appears on the display. To change the cooking time, use button “-” or “+”. Return to point 3 chapter “Selecting the cooking time”. The time of day appears again on the display. To increase the cooking time, use button “-” or “+”. Selecting the cooking time: When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “12. 00”. Selecting and changing the clock time: 1. Press button “-” or “+” to set the hour. Press “ok” and “-” or “+” to set the minutes. To change the time: Press and hold “ok” for 2 seconds until the time flashes on the display. Repeat the steps described above. Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes. Proceed as described in points 1 and 2 chapter “Selecting the cooking time” 2. Press “set” to set the end of cooking time: the indicator next to the symbol lights up. Set the end of cooking time using button “-” or “+”. [. . . ] Press “ok”: The acoustic signal stops. The time of day appears again on the display. To change the temperature: 1. Turn knob ᕇ and select the desired temperature. [. . . ]