User manual WHIRLPOOL FDN 840 INSTRUCTION FOR USE

[. . . ] Keep the packing materials (plastic bags, polystyrene parts, etc. ) out of the reach of children, as they are a potential source of danger. Scrapping/Disposal The appliance is manufactured using recyclable material. This appliance is marked in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring the correct disposal of this appliance, you can help prevent potentially negative consequences for the environment and the health of persons. [. . . ] • For the water connection, use the pipe supplied with the new appliance; do not reuse that of the previous appliance. • It must be possible to disconnect the appliance from the power supply by unplugging it or by means of a mains two-pole switch installed upstream of the socket. SAFETY • Do not store or use petrol, flammable liquids or gas in the vicinity of this or other electrical appliances. The fumes can cause fires or explosions. 16 INSTALLATION • Install the appliance away from heat sources. Direct exposure to sunlight or installation near heat sources (radiators, cookers) will increase energy consumption and should therefore be avoided. If this is not possible, the following minimum distances must be respected: - 30 cm from coal or oil stoves; - 3 cm from electric and/or gas cookers. • Clean the inside (refer to “Maintenance and cleaning”). • Insert or install the accessories/parts supplied. USING THE PRODUCT This appliance is a drawers refrigerator which enables the storage of fresh foods and beverages. Refrigerator compartment defrosting is completely automatic. Optimum performance depends on the climatic class indicated on the rating plate. This product is fitted with a drawers’ internal ventilation system. For this reason, attention should be paid to the ventilation holes. Foods and beverages should be stored in closed containers or covered with film. Switching the appliance on and temperature adjustment. The ideal temperatures for preserving foods are already factory set. Notes: • 4-5 hours are required for the refrigerator compartment to reach a temperature suitable for storage. • Ambient temperature, frequency of drawer opening and position of the appliance can affect the temperature inside. These factors should therefore be taken into account when setting temperatures. • In storing the food in the drawers, ensure vents are not obstructed. • Do not place hot food in the compartments. • Store liquids in closed containers. • Storing vegetables with high water content can cause condensation to form: this does not affect correct appliance operation. 17 USING THE PRODUCT (continuation) Storing food in the refrigerator compartment. [. . . ] approved fuse to BS 1362 type and proceed as follows: 1. Fit replacement 13A fuse into fuse cover. Important: The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted. Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug. [. . . ]