User manual WHIRLPOOL G RUU 2V 20/0 INSTALLATION

[. . . ] Installation and the electrical connection must be carried out by a qualified technician, according to the manufacturer’s instructions and local safety regulations. Clean the inside of the appliance before using it. SAFEGUARDING THE ENVIRONMENT 1. Packing The packing material is 100% recyclable and bears the recycling symbol. For disposal, comply with the local regulations. [. . . ] Meat/vegetable drawer temperature control device. • The cold air is conveyed inside the meat drawer through an opening between the refrigerator compartment and the freezer compartment. In this way the temperature inside the meat drawer is kept lower than the rest of the refrigerator. The air flow can be adjusted by means of the special slider. • To store vegetables in the meat drawer, shift the control device all the way to the left, to the vegetables setting. This avoids possible damage due to the vegetables freezing. Crisper moisture control device. • The level of humidity inside the crisper can be adjusted by moving the slider in the desired position. • By moving the slider to the far right, humidity will be eliminated from the compartment. This setting is better for preserving fruits and vegetables with skin. • By moving the slider to the far left, humidity is maintained inside the compartment. This setting is better for preserving leaf vegetables. 9 USING THE APPLIANCE FIRST USE Connect the appliance to the water system and power supply (refer to the Installation manual). The water filter is located under the freezer compartment door. 13 USING THE APPLIANCE OPTIONAL FUNCTIONS Control panel lock function This function prevents accidental changing of appliance settings or switching off. The panel can be locked by pressing both the fast freeze button on the left of the panel and the vacation button on the right of the panel at the same time, for about 3 seconds: the symbol will come on and an acoustic alarm will indicate activation of the function. To deactivate the function, carry out the same procedure until the symbol goes off. Automatic ice-maker control panel lock This function consists of deactivating ice and water dispensing for easier cleaning or to prevent unintentional use. It is set by pressing the Child Lock button for 3 seconds until the symbol lights up; an acoustic signal confirms activation. To deactivate the function, carry out the same procedure until the symbol goes off. Note: This function does not disconnect the power to the appliance, ice-maker or light, but simply deactivates the dispenser levers. Fast freezing This function must be activated before freezing fresh food. To activate the function, press the button until the fast freeze symbol appears. The function is automatically deactivated after 24 hours, or manually by pressing again the button. Vacation This function deactivates the refrigerator compartment if the user is going away for sometime. This function can be activated or deactivated by pressing the button: The relevant icon will come on and the displayed temperature of the refrigerator compartment will be replaced by a dash. To reactivate the refrigerator compartment, repeat the operation. After activating the function, remove perishable food from the refrigerator compartment and keep the door closed, since the refrigerator maintains an adequate temperature for preventing the formation of odours. 14 USING THE ICE AND WATER DISPENSER First use When the ice and water dispenser is used for the first time, the first ice cubes and water coming out of the dispenser may have an unpleasant taste and should therefore be discarded. [. . . ] Wait about 3 minutes for the dispenser motor to reset. If the ice has an unpleasant smell or taste: • Has the ice absorbed bad odours?Water containing minerals may require a filter. • Is the ice bucket/freezer compartment clean? [. . . ]