User manual WHIRLPOOL G32026PELB PRODUCT FICHE

[. . . ] Blankets made of synthetic fibres, bedcovers filled with polyester or other artificial fibres, sleeping bags, bathmats and similar items. This programme (40°C) is tested and approved by The Woolmark Company for 3. If you select “Rinse hold” do not leave items to soak for too long. A very gentle spin is used in this programme. [. . . ] € Do not use liquid detergent for the main wash when activating “Prewash”. ž Clean + • Choose this option if you use an in-wash additive for stain removal (powder, for example Vanish). € Optimizes the additive's efficiency to get better wash performance and stain removal. • Select temperature of 30 or 40°C and use with maximum load. € Add an appropriate amount of in-wash additive for stain removal (powder) to the prewash chamber. ž Normal “Soil level” modifier • Adapts the programme duration to the soil level of your laundry. PROGRAMME START Turn on the tap and press and hold the “Start (Pause)” button - the button's light stops blinking and goes on; it will take some time until water enters into the washing machine. The programme sequence indicator on the display shows the sequence reached in the programme. After starting the programme, the indication runs from left to right through “Add garment”, prewash, wash, rinse, spin. When a programme sequence is finished, the corresponding symbol goes off. The display shows the remaining programme time. The predefined temperature and spin speed can be altered by pressing the “Temperature” and the “Spin speed” modifier. € Particularly useful if you want to postpone spinning to a later time, or if you want to drain only. € Do not leave the laundry to soak in the rinse hold for too long. Note: The programme starts to “Rinse hold” when the “Rinse hold” button light blinks; the “Start (Pause)” button light Terminate the “Rinse hold” option: • Press the “Rinse hold” or the “Start (Pause)” button cycle for the present wash programme. € If you do not wish to spin the clothes, press and hold the “Reset (Drain)” button for a few seconds. The water is drained out then, before the door can be opened. “Spin speed” modifier • Every programme has an automatic predefined spin speed. € Press the button to set another spin speed. € Spin speed “0” is only selectable for programme “Spin & Drain”; the final spinning is cancelled in this case - the water is drained out only at the end of the programme. € Particularly suitable for areas with very soft water, for baby clothes or to help people with skin allergies. ; the programme will terminate automatically with the final spin also blinks. [. . . ] This saves you energy and maintains good washing results. “Easy ironing” button • Reduces creasing by increased water quantity and a very gentle spin. €Rinse hold” button • The laundry remains in the last rinse water without being spun: this prevents creasing and colours from changing. • This option is particularly recommended for the programme “Synthetics” or “Delicate”. [. . . ]