User manual WHIRLPOOL GCFP 4824/1 WH INSTRUCTION FOR USE

[. . . ] Use the programme selection button to choose your washing programme. - The display will show you the duration of the selected programme. - When there are few dishes, additionally use the Half Load button. Start the programme with the start / pause button: Attention Avoid opening the door during the washing process. [. . . ] This interrupts the washing process, and hot steam will escape. When the door is closed, the programme will continue. Use the on / off button to turn the machine off again. When the progress indicator light “programme end” lights up, the programme is complete. Allow your dishes to cool for 15 minutes, with the door open. Begin with the lower basket. PROGRAMME TABLE Programme number 1 2 3 4 Reference ** 5 6 7 8 Programme name Pre-wash Cleaning temperature 30 Min. Delicate Bio Normal Intensive Hygiene+ Auto Used dishes which are to be washed at a later time 35°C Dessert and coffee dishes with food leftovers which are not dried on 40°C Glasses, dessert and coffee dishes with food leftovers which are not dried on 50°C Normally dirty dishes with starch containing food leftovers which are not dried on 55°C Normally dirty dishes with food leftovers which are not dried on 70°C Especially dirty dishes with food leftovers which are dried on 70°C Dishes with food leftovers which are dried on especially hard; dishes which are to be cleaned with an unusual amount of heat High 55°C-65°C Normally dirty dishes with food leftovers which are dried on Suited to Degree of dirtiness Detergents 15 cm³ 15-25 cm³ + 5 cm³ - Few Few medium medium High medium to high Pre-wash End x 35°C wash Cold rinse Cold rinse End x Pre-wash x x Pre-wash x x Pre-wash x x 50°C Pre-wash 70° wash Cold rinse Cold rinse Dry End x x 50°C Pre-wash 70° wash Cold rinse Cold rinse Dry End x - 40° wash Clear rinse Clear rinse Dry End 50° wash Clear rinse Clear rinse Dry End 55°wash Clear rinse Clear rinse Dry End Programme process The programme process is adapted to the degree to which the dishes are dirtied Duration (min) Energy (kWh) Water (I) 15 3, 4 30 0, 75 9, 6 71 0, 80 12, 4 170 1, 01 12 96 1, 00 12, 4 128 1, 40 17, 2 124 1, 67 15, 4 112-130 1, 00-1, 25 9, 6-18, 4 The consumption values shown in the table were determined under standard conditions. For this reason, deviations are possible under practical conditions. ** Reference programme for test institutes The tests in accordance with EN 50242 must be carried out with a full salt container of the water softener, a full reservoir for the rinse aid and the testing programme. Load capacity : 10 FUNCTION BUTTONS Function buttons On/off button You turn your dishwasher on / off with this button. Repeat the procedure to turn off the key lock. Attention The key lock does not lock the door. You only prevent changes to the set programme. Salt level indicator light When this indicator light comes on, you must refill special salt. In machines which do not possess an electrical salt indicator, the salt content can be read on the container for the salt. When the visual fill indicator is dark, there is enough salt in the container. When the colour is light, open the container and add dishwasher salt. SALZ S EL TU Z Full S EL Empty Programme selection buttons Programme change Use the programme selection button to select the desired programme. The corresponding programme light lights up. To change a running programme, press the start / pause button: The programme light turns off. Select a new programme and start it with the start / pause button: The respective programme light lights up. [. . . ] Select a new programme and start it with the start / pause button: The respective programme light lights up. Note The new programme begins at the point at which you terminated the former programme. 4 LED progress indicator lights Wash Rinse Dry End During the washing process, the individual active programme segments are shown by the LED progress indicator lights. Cancellation of a programme Attention - In the case of the rapid programme, the progress indicator light for drying does not light up. - The washing process is only complete when the progress indicator light “programme end” lights up. Press start/pause button for 5 seconds. [. . . ]