User manual WHIRLPOOL GKEA ELITE PROGRAM CHART

[. . . ] Area for drawers and pull-out baskets 4. Ice packs (inside - if provided) Storage compartment Area for freezing GB Note: the design of drawers and accessories may vary, depending on the model. Controls (depending on model) A Digital temperature display. [. . . ] After about 3 seconds, when the appliance is warm, (internal temperature above 10°C) only the two lines in the middle remain illuminated; The acoustic alarm and red LED C are activated. The acoustic alarm stops while the red LED continues to blink. When the temperature reaches -12°C, the red LED automatically stops blinking. 2. Press button G to mute the acoustic alarm. Wait until the temperature indicated on the digital display reaches -12°C. Place food to be frozen and/or already frozen food in the freezer. 5019 608 01058 PRODUCT SHEET Freezer compartment temperature adjustment The appliance is normally factory set for optimum operation at a temperature of -18°C. To alter the internal temperature between -16°C and -24°C, proceed as follows: • Press button E once to adjust the internal temperature: the digital display shows the temperature previously set. • Each time the button is pressed, the temperature setting is changed by 1°C: the value (between -16°C and -24°C) blinks cyclically on the display. • Approximately 5 seconds after the button has been pressed for the last time, the set temperature is stored, the display stops blinking and the current internal temperature is shown on the display. • The 6th Sense/“Dynamic Intelligence” function (blue LED) is automatically activated due to door opening and when small amounts of fresh food are placed in the freezer. The duration of the 6th Sense function varies depending on the quantity of food loaded in the freezer and ambient temperature. When optimal operating conditions have been restored the function deactivates automatically and no operation is required. Note: The digital display shows internal temperature values between +10°C and -24°C. [. . . ] An illuminated dot appears on the digital display. Follow the steps detailed in “Switching on the appliance”. F NL E P I GR S N DK FIN 5019 608 01058 D GB Printed in Italy 03/09 [. . . ]