User manual WHIRLPOOL GKTF 3559 INSTRUCTION FOR USE

[. . . ] BEFORE USING THE APPLIANCE • This appliance is intended to be used in household and similar applications such as - staff kitchen areas in shops, offices and other working environments; - farm houses and by clients in hotels, motels and other residential type environments; - bed and breakfast type environments; To ensure best use of your appliance, carefully read the operating instructions which contain a description of the product and useful advice. Keep these instructions for future reference. After unpacking the appliance, make sure it is not damaged and that the door closes properly. Any damage must be reported to the dealer within 24 hours of delivery of the appliance. [. . . ] • Do not use mechanical, electric or chemical means other than those recommended by the Manufacturer to speed up the defrost process. • Do not damage the appliance refrigerant circuit pipes. • Do not use or place electrical appliances inside the product if they are not of the type expressly authorised by the Manufacturer. 5 HOW TO USE THE FREEZER The freezer can be used for storing already frozen food and for freezing fresh food. Switching on the freezer for the first time • There is no need to set the freezer temperature on the thermostat because the appliance is already factory set. • The alarm signal activates, indicating that the freezer has not yet reached a sufficiently cold temperature for storage of foodstuffs. • Only place food in the freezer once the alarm signal has deactivated (for further details, see the enclosed product sheet). Temperature Adjustment For temperature adjustment, see the enclosed product sheet. NOTE: Ambient air temperature, the frequency of door opening and the position of the appliance can affect the freezer internal temperature. Take these factors into consideration when setting the thermostat knobs. “Dynamic Intelligence” function The Dynamic Intelligence function, if present, is automatically activated in the following cases: Door opening The function activates when door opening causes the internal temperature to increase to values that do not ensure safe storage of food and remains active until optimal storage conditions have been restored. Placing fresh food in the freezer The function activates when fresh food is placed in the freezer and remains active until optimal freezing conditions are reached so as to ensure the best freezing quality with the lowest power consumption. NOTE: Besides the quantity of food loaded into the freezer, ambient temperature and the quantity of food already inside the freezer affect the duration of the Dynamic Intelligence function. Therefore significant duration variations are quite normal. Freezing The amount of fresh food (in kg) that can be frozen in 24 hours is indicated on the appliance data plate. For optimum appliance performance, press the fast freeze button (until the yellow LED lights up) 24 hours before placing fresh food in the freezer. After placing fresh food in the freezer, 24 hours on fast freeze function is generally sufficient; After 24 hours, deactivate the fast freeze function. Attention: In order to save energy, when freezing small amounts of food, the fast freeze function can be deactivated after a few hours. If the Dynamic Intelligence function is present, appliance operation is controlled automatically and no operation is required (see chapter “Dynamic Intelligence” function). 6 HOW TO USE THE FREEZER Tips for freezing and storing fresh food. • Before freezing, wrap and seal fresh food in: aluminium foil, cling film, air and water-tight plastic bags, polythene containers with lids or freezer containers suitable for freezing fresh food. • Food must be fresh, mature and of prime quality in order to obtain high quality frozen food. • Fresh vegetables and fruit should preferably be frozen as soon as they are picked to maintain the full original nutritional value, consistency, colour and flavour. Some meat, especially game, should be hung before it is frozen. [. . . ] If it has not, disconnect the appliance from the power supply and wait for about an hour before switching on again. If the problem persists after this course of action, contact After-sales Service. Specify: • the nature of the fault, • the model, • the Service number (the number after the word SERVICE on the rating plate on the inside of the appliance), • your full address, • your telephone number and area code. Note: The direction of door opening can be changed. If this operation is performed by After-sales Service it is not covered by the warranty. [. . . ]