User manual WHIRLPOOL GRAND PRIX CO PROGRAM CHART

[. . . ] After cycle start a default drying time is indicated depending on the selected drying programme. After 15 seconds the time will be adjusted to the real expected remaining time, depending on size, type and humidity of the load. When the Anti-Crease option is selected and laundry has not been taken out, an anti-crease cycle is activated for 12 hrs. During the countdown the drum will turn from time to time to redistribute the laundry. [. . . ] Do not tumble dry: Woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc. Important: only use specific indicated dryersafe additives and rinse items that have been treated with stain remover thoroughly in plenty of water before drying. Only use specific indicated dryer-safe plastic items and never dry rubber or articles contaminated with vegetable oil in the dryer. SELECTING A PROGRAMME & OPTIONS Programme and Options: • To select a programme, turn the programme selector knob to the required position. The Start/Pause indicator lamp is blinking, “ “ indicating that the cycle needs to be started. • To select an option, press the corresponding button. The indicator light in the button lights up confirming that the selection has been made. • Press the option button again to cancel the option. STARTING & COMPLETING A PROGRAMME 1. Having selected the desired programme and options, press the Start/Pause button. If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing. This Anti-Crease cycle can be extended up to 12h when Anti-Crease option has been selected. On completion of the programme, set the programme selector knob to position “0”. CHANGING A PROGRAMME When changing the programme during the drying cycle, the dryer stops. The Start/Pause indicator lamp is blinking “ “. To operate the new programme, press the Start/Pause button. INTERRUPTING A PROGRAMME To interrupt the dryer during operation 1. Set the programme selector knob to Airing. Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the programme stops automatically if you open the door. To restart, after door opening, close the door and press the Start/Pause button again. DAILY MAINTENANCE & CLEANING Clean the lint filter at the end of every drying cycle: 1. Remove lint using a soft brush or your fingertips. [. . . ] Water droplets underneath the dryer: • Is the heat exchanger correctly positioned?• Has any fluff on the heat exchanger seal been wiped away?• Has any fluff on the door seal been wiped away?• Has the water container been positioned correctly? [. . . ]