User manual WHIRLPOOL GSF 5363 TW-WS PROGRAM CHART

[. . . ] GB GSF 5363 PROGRAMME CHART Water stop indicator “Water stop” device is not working. Switch off the dishwasher and shut off the water tap. Programme progress indicator Prewash Only lights up for programmes with prewash (the symbol “+” in the table below indicates that detergent must be added). Start button indicator lamp Switches on when the dishwasher is operating. [. . . ] Programme recommended when using detergents of type B (enzyme-based detergents). Reference programme for Test Institute and energy label. 5019 100 90120 (We reserve the right to make technical modifications) Quick Reference Guide Daily check list 1. Arrange crockery so that items do not touch each other. Load cups at an inclination to facilitate water circulation. In general, place the cutlery in the basket with the handles positioned downwards, but ensure that sharp knives and forks that might cause injury are placed in the basket with the handles positioned upwards. Make sure the water jet can reach all loaded items and that the spray arms turn freely. Turn on the water supply tap before starting the dishwasher. GB Lower rack Upper rack Crockery holders: • Down: cups and long-stemmed glasses. • Up: plates. Important: • Switch off the dishwasher: once the “Start” indicator lamp has switched off. If you switch off the dishwasher during a wash cycle, when switched on again the dishwasher resumes the cycle from where it was interrupted. If a fault occurs or you wish to change the current programme, press the “START” button for about 5 seconds until the Start indicator lamp switches off! [. . . ] • The rack must be level on both sides. Plate holder: • The plate holders may be removed to increase available space. • To reposition: simply insert in the required position (normal or crosswise). • If regeneration salt is to be added, IMMEDIATELY start a washing programme, to eliminate any residual salt. [. . . ]