User manual WHIRLPOOL GSFH 1546 WS PROGRAM CHART

[. . . ] Electric indicator on control panel (if provided). A BC Check the rinse aid level Check the regeneration salt level On models with water softener system only. Electric indicator on control panel (if provided). Load the racks Close the door, turn on the water tap Select a programme Select additional options Refer to the dishwasher loading instructions. The last programme selected will light up. Select the desired programme (using the specific button or knob). The corresponding indicator lamp lights up. [. . . ] When the upper rack is in place the retainers must always be closed. Retainer closed Retainer open F F Lower rack: Depending on the model with fixed or tilting plate holders (G). Half Load: Load the lower rack only. Greater washing power, particularly for plates and saucepans. Cutlery basket (J) or (H): Some models are provided with a grid (I) that can be fitted onto the cutlery basket to keep items separated. Cutlery basket (D), if provided, for appliances with half load only. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the sharp end facing downwards. Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. Spare parts which are sold separately: 1) Multi-purpose support (A) - N. WGH 1000. What to do if. . . If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see also the corresponding chapter in the user instructions). Problem Cause • Open the tap. Remedy The appliance is not • No water supply. working • The appliance does not load sufficient water. • There is a power failure. • Clean the water supply tap filter. Ensure there are no kinks in the water hose. • • • • Insert the plug into the mains socket. Check the domestic circuit fuse. • Starting the selected programme. • The programme can be set to “0” to start. If crockery is not perfectly dry If crockery is not perfectly clean • Insufficient rinse aid. • The water jet does not reach the crockery. • Spray arm nozzles clogged. • Increase dosage *. • Arrange crockery so that items do not touch each other. • Follow recommended detergent dosage. • Select a more intense wash cycle. • The spray arms must be able to turn freely. • Remove any impurities obstructing the water flow *. • Incorrect detergent/detergent too • Use a good quality detergent. [. . . ] • The service code (the number indicated on the adhesive rating plate) inside the door on the right-hand side. Before using the dishwasher, read the user instructions! GSFH 1546 Quick Reference Guide GB Indicators Programme selector knob Add regeneration salt Only add regeneration salt immediately before starting a wash programme. Add rinse aid On/Off button Start button Switches “on” when the dishwasher is operating. Switches off at the end of the programme. Programme chart Programmes Loading instructions Detergent 2) A X X X X B X X X Consumption 3) Litres kWh Minutes Pre-Rinse cold Crockery to be washed later. Lightly soiled crockery with no dried-on food. Heavily soiled crockery, especially pots and pans. 3) 5. 0 13. 0 16. 0 16. 0 17. 0 0. 02 0. 70 1. 05 1. 35 1. 65 10 30 195 120 145 Rapid 30 min 40°C Bio 1) 4) 50°C 60°C 70°C Daily Intensive 1) 2) Reference programme for energy label in compliance with EN 50242 regulations; Refer to “User instructions“; 4) Programme data obtained in conformity with European standard EN 50242. [. . . ]