User manual WHIRLPOOL GSX 7586/1 PROGRAM CHART

[. . . ] Electric indicator on control panel (if provided). Check the regeneration salt level On models with water softener system only. Electric indicator on control panel (if provided). Load the racks Select a programme Select options Refer to the dishwasher loading instructions. The last programme selected will light up. Press the button until the desired programme lights up. [. . . ] Rack height adjustment (also when loaded): • Lower adjustment: pull out the two rack handles outwards (E) and lower the rack. • Upper adjustment: pull the two handles (E) upwards until the rack clicks into place (Factory setting). Removing the top rack to provide clearance for large items of crockery in the bottom rack: Open the rack guide retainers (F) on the right and left and remove the top rack. When the upper rack is in place the retainers must always be closed. Retainer closed Retainer open F F Lower rack: Depending on the model with fixed or tilting plate holders (G). Half Load: Load the lower rack only. Greater washing power, particularly for plates and saucepans. Cutlery basket (J) or (H): Some models are provided with a grid (I) that can be fitted onto the cutlery basket to keep items separated. Cutlery basket (D), if provided, for appliances with half load only. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the sharp end facing downwards. Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. Spare parts which are sold separately: 1) Multi-purpose support (A) - N. WGH 1000. What to do if. . . If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see also the corresponding chapter in the user instructions). Problem Cause • Open the tap. Remedy The appliance is not • No water supply. working • The appliance does not load sufficient water. • There is a power failure. • Clean the water supply tap filter. Ensure there are no kinks in the water hose. • • • • Insert the plug into the mains socket. Check the domestic circuit fuse. • Starting the selected programme. • The programme can be set to “0” to start. If crockery is not perfectly dry If crockery is not perfectly clean • Insufficient rinse aid. • The water jet does not reach the crockery. • Spray arm nozzles clogged. • Increase dosage *. [. . . ] • Change water hardness setting, if necessary add salt *. • Use suitable glasses. • not removable • Insufficient water softening, calcium deposits. • Cannot be washed in the Opaque glasses/ dishwasher. glasses not sparkling Rust on cutlery Identifying appliance faults • Not made of stainless steel. • Use suitable cutlery. • The START indicator lamp flashes. • Ensure the filter assembly is not clogged and • Indicator F. . . [. . . ]