User manual WHIRLPOOL GSXK 7593/5 PROGRAM CHART

[. . . ] - If the appliance is switched off during a wash cycle, when switched on again it will resume the cycle from where it was interrupted. At the end of the programme an acoustic signal will sound. Only after the START button has switched off: press the OFF button. Warning: when the door is opened steam comes out! [. . . ] Retainer closed Retainer open F F Lower rack: Depending on the model with fixed or tilting plate holders (G). half Load: Load the lower rack (see description of Options). Greater washing power, particularly for plates and saucepans. Cutlery basket (J) or (H): Some models are provided with a grid (I) that can be fitted onto the cutlery basket to keep items separated. Cutlery basket (D), if provided, for appliances with half load only. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the sharp end facing downwards. only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. Spare parts which are sold separately: 1) Multi-purpose support (A) - N. If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see also the corresponding chapter in the user instructions). €¢ Ensure there are no kinks in the water hose. €¢ • • • Insert the plug into the mains socket. €¢ Arrange crockery so that items do not touch each other. €¢ Select a more intense wash cycle. €¢ The spray arms must be able to turn freely. €¢ Remove any impurities obstructing the water flow *. If crockery is not perfectly clean • The water jet does not reach the crockery. €¢ Depending on the material, if necessary use a detergent with a greater whitening power. Opaque glasses/ glasses • Cannot be washed in the dishwasher. Not sparkling Rust on cutlery Identifying appliance faults • Not made of stainless steel. [. . . ] The wash cycle can be programmed to start after 1 - 24 hours. With each successive touch of the button, the delayed start indicator increases by 1 hour, and after 24 returns to 00. The dishwasher will start at the set time. Indicators Add rinse aid Add regeneration salt Only add regeneration salt immediately before starting a wash programme. [. . . ]