User manual WHIRLPOOL HB 670 AN PROGRAM CHART

[. . . ] Products This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. The symbol on the appliance or accompanying documentation indicates that this product should not be disposed of as unsorted municipal waste but must be taken to a collection point for the treatment of WEEE. Dispose of in accordance with local standards governing waste disposal. [. . . ] Cleaning the burners • This cooktop (Class 3) has been designed to be used 1. Extract the burner from its housing by pulling it up. Soak the burner and the cap in hot water and liquid detergent. Ensure that none of its openings is clogged. Reposition the burner and cap. grids represent a choking hazard for young children. After cleaning the panstand grids, please ensure that all the rubber feet are correctly fitted. Note: to avoid damaging the electric ignition device, do not use it when the burners are not in their housing. Cleaning the electric hotplate The electric hotplate must be cleaned when it is lukewarm. Wipe with a cloth moistened with water and salt, and polish with a cloth moistened with oil. ENERGY SAVING TIPS • The cooktop is equipped with burners and/or a hotplate • If possible, keep the container covered when cooking. with a small amount of TROUBLESHOOTING GUIDE water in order to cut down cooking time. • A pressure cooker allows you to save even more energy and time. The burner fails to ignite: • Is the main gas delivery valve open?• Has the delivery of the town gas (methane) been suspended?• Is the gas cylinder (liquid gas) empty?• Are the openings of the burner clogged?• Have the cap and burner been positioned correctly after cleaning?(See paragraph “Care and Maintenance”. ) 2. The burner fails to remain lit: position with the small flame symbol . The electric ignition device does not work: • Is there a power failure? • Repeat the ignition operation, turning the knob to the with different diameters. Use pots and pans whose bottom diameter is equal to that of the burners and hotplate, or slightly larger. • Only use flat-bottomed pots and pans. • The pots and pans must not overlap the control panel. Burner Rapid (9, 1 cm) Semirapid (6, 4 cm) Auxiliary (4, 5 cm) Triple crown (12 cm) Fish kettle (23 cm x 4, 5 cm) Diameter of container 24 to 26 cm 16 to 22 cm 8 to 14 cm 24 to 26 cm 16 to 35 cm AFTER SALES SERVICE Before you call the After Sales Service: 1. Check the “Troubleshooting guide” above to see if you can eliminate the trouble yourself. Re-start the cooktop, to check whether correct operation has been restored. [. . . ] The connection of the cooktop to the gas pipe network or gas cylinder must be made by means of a rigid copper or steel pipe with fittings complying with local regulations, or by means of a continuous-surface stainless steel hose complying with local regulations. Interpose gasket (B) in the elbow connection. The maximum length of the hose is 2 m. enough air to allow the gas to burn correctly (see the separate Product Description Sheet). Upon completion of adjustment, reseal using sealing wax or an equivalent material. [. . . ]