User manual WHIRLPOOL HD F80 S INSTRUCTION FOR USE

[. . . ] LUFTIG BF570 AU ENGLISH 4 ENGLISH 4 Contents Safety information Product description Control panel Cleaning and maintenance 4 7 7 8 What to do if . . . Technical data Environmental concerns IKEA GUARANTEE 10 1 1 1 1 13 Safety Information Before first use Your safety and that of others is paramount. Remove cardboard protection pieces, protective film and adhesive labels from accessories. Check the appliance for any transport damage. [. . . ] Use a damp cloth and a soft liquid detergent. Do not use products containing abrasives. DO NOT USE ALCOHOL The panel normally covers the grease filters, and must therefore be opened each time access to the grease filters and the inside of the hood is required (e. g. Opening: Pull the panel (LEFT SIDE) downwards. Closing: The panels must be fixed to the appropriate pins on the surface of the hood. WARNING: Always check that the panel is fitted properly. If washed in the dishwasher, the grease filter surface may become matt. This will not cause any reduction of performance. To remove the filter pull out the handle. After the filter has been washed and dried, replace following the inverse procedure. Replacing the halogen lamps WARNING: - Only use 12V 20W 30° Ø35 12V GU4 halogen lamps. Disconnect the hood from the electric power supply. Use a small screwdriver to remove the lamp by pushing its edges upwards. Remove the faulty light bulb and replace with a new one. To clean the grease filter The filter traps all cooking grease particles. The metal grease filter has unlimited duration. It should be washed at least once a month, either by hand, or by placing it in the dishwasher (use a short cycle and low temperature). ENGLISH 9 Charcoal filter maintenance The charcoal filter traps unpleasant cooking smells. Replace the charcoal filter every 4 months. Fitting or replacing the charcoal filter 1. Disconnect the hood from the electric power supply. Check that the R pins on the conveyor correspond with the S holes. Turn the filters to lock them to the pins. To remove the filters follow the inverse procedure. Replace the grease filters. 2x S S R ENGLISH 10 What to do if . . . Problem The appliance does not work Possible cause There is no mains elctrical power Solution Check for the presence of mains electrical power. [. . . ] Repairs not carried out by our appointed service providers and/or an authorized service contractual partner or where non original parts have been used. Repairs to parts or systems caused by unauthorized modifications made to appliance. Repairs caused by installation which is faulty or not according to specification. Problems caused by incorrect or inadequate venting of the appliance. [. . . ]