User manual WHIRLPOOL HD KT00 90S INSTRUCTION FOR USE

[. . . ] Technical data Environmental concerns IKEA GUARANTEE 9 10 1 1 1 1 Safety Information Before first use Your safety and that of others is paramount. Remove cardboard protection pieces, protective film and adhesive labels from accessories. Check the appliance for any transport damage. To avoid any damage do not place any weights on the appliance. [. . . ] The hood should be installed away from particularly dirty areas, windows, doors and heat sources. The accessories for wall fixing are not included because walls made of different materials require different types of fixing accessories. Use fixing systems suitable for the walls of your home and the weight of the appliance. for more details , contact a specialized dealer. Keep this booklet for future consultation. - Disconnect the appliance from the power supply. iMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth. € Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. iMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. € Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions. IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals. ENGLISH 8 To clean the grease filter The metal grease filter has an unlimited life and must be washed once a month by hand or dishwasher at low temperature and with a short cycle. With cleaning in a dishwasher the grease filter may become dull; this does not effect its filtering capacity. Disconnect the hood from the electric power supply. 2 Remove the grease filters: pull the spring release handle downwards, then remove the filter. After cleaning the grease filter, remount in reverse order ensuring the entire extraction surface is covered. Reverse the above procedure to remove the charcoal filter: by turning the knobs fixing it to the hood by 90°. Lamp maintenance Disconnect the hood from the electricity. Warning Prior to touching the light bulbs ensure they are cooled down. Use a small screwdriver or other suitable tool to prise off the cover. [. . . ] € Repairs caused by installation which is faulty or not according to specification. € The use of the appliance in a nondomestic environment i. If a customer transports the product to his home or another address, IKEA is not liable for any damage that may occur during transport. However, if IKEA delivers the product to the customer’s delivery address, then damage to the product that occurs during this delivery will be covered by IKEA. [. . . ]