User manual WHIRLPOOL HD MT10 60AN INSTRUCTION FOR USE

[. . . ] MOLNIGT GB ENGLISH 4 ENGLISH 4 Safety information Product description Control panel Cleaning and maintenance What to do if . . . Contents 4 7 7 8 10 Technical data Environmental concerns Electrical connection for Great Britain and Ireland only IKEA GUARANTEE 1 1 12 13 14 Before first use Your safety and that of others is paramount. Remove cardboard protection pieces, protective film and adhesive labels from accessories. Check the appliance for any transport damage. [. . . ] A B C D ENGLISH 8 Cleaning and maintenance WARNING: - Never use steam cleaning equipment. - Disconnect the appliance from the power supply. IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth. • Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. • Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions. IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals. To clean the grease filter The metal grease filter has an unlimited life and must be washed once a month by hand or dishwasher at low temperature and with a short cycle. With cleaning in a dishwasher the grease filter may become dull; this does not effect its filtering capacity. Grease filter maintenance: 1. Disconnect the hood from the electric power supply. 2 Remove the grease filters: pull the spring release handle downwards, then remove the filter. 3. After cleaning the grease filter, remount in reverse order ensuring the entire extraction surface is covered. ENGLISH 9 Charcoal filter maintenance (if the hood is installed in recirculation mode) 1. Unplug the appliance or disconnect the power supply. 2. Remove the grease filter 3. Hook the carbon filter firstly to the metal tab at the back on the hood. 4. Fix it at the front with the two knobs. Unlike traditional charcoal filters, this charcoal filter can be washed and reactivated. With normal hood use, the filter should be cleaned once a month. The best way to clean the filter is in a dishwasher at the highest temperature possible, using a normal dishwasher detergent. To avoid particles of food or dirt settling on the filter during washing and giving rise to unpleasant smells, it is advisable to wash the fi lter on its own. After washing, dry the filter in the oven at 100°C for 10 minutes to reactivate it. The filter will retain its odourabsorbing capacity for three years, after which it will have to be replaced. Lamp maintenance Disconnect the hood from the electricity. Warning Prior to touching the light bulbs ensure they are cooled down. [. . . ] Unless such damages can be proved to have been caused by production faults. • Cases where no fault could be found during a technician’s visit. • Repairs not carried out by our appointed service providers and/or an authorized service contractual partner or where nonoriginal parts have been used. • Repairs caused by installation which is faulty or not according to specification. [. . . ]