User manual WHIRLPOOL HD R40 W PROGRAM CHART

[. . . ] Si les instructions d’installation du dispositif de cuisson à gaz indiquent une distance supérieure, il est nécessaire de la respecter. F Manuel d’utilisation et d’entretien I Libretto di Uso e Manutenzione Contiene anche istruzioni e prescrizioni per una sicura installazione. Prima di installare o utilizzare la cappa, leggete e seguite attentamente le istruzioni riportate in questo libretto e nel libretto di installazione allegato. AVVERTENZA: Rispettare la distanza minima di installazione dai fuochi indicata sul libretto di installazione. Se le istruzioni di installazione del dispositivo di cottura a gas specificano una distanza maggiore, bisogna tenerne conto. 5019 618 33119/A LI3KHA SAFEGUARDING THE ENVIRONMENT 1. [. . . ] Do not “flambé” food under the hood. The room must have adequate ventilation when the hood is used at the same time as appliances operating on gas or other fuels. The discharge air must not be eliminated in a duct used to remove fumes produced by appliances operating on gas or other fuels, but must have a separate outlet. All the national regulations on air discharge envisaged by art. 7. 12. 1 of CEI EN 60335-2-31 must be observed. If the hood is used together with other appliances operating on gas or other fuels, the negative pressure in the room must not exceed 4 Pa (4 x 10-5 bar). Therefore, make sure the room is adequately ventilated. Do not leave pans unattended when frying, since the cooking oil could catch fire. Make sure the lamps are cold before touching them. The hood is not a shelf, therefore do not overload or place objects on it. Do not use or leave the hood without its lamps correctly installed - risk of electric shock. Wear work gloves for all installation and maintenance operations. The product is not suitable for outdoor use. The air sucked by the hood must not be eliminated through the same flue of the heating system or other appliances using gas or other fuels. 5019 618 33119/A D GB F I LI3KHA The mains voltage must match that given on the rating plate located inside the hood. If provided with a plug, connect the hood to a socket complying with the current regulations and located in an accessible area. If it does not have a plug (direct connection to the power supply) or if the plug is not in an accessible place, fit a suitable double-pole switch that ensures complete disconnection from the power supply in category III overvoltage conditions, complying with the installation rules. WARNING: Before reconnecting the hood circuit to the power supply and checking correct operation, always make sure the power cable is correctly fitted and that it was NOT crushed in its housing during installation. Make sure to have this operation carried out by a specialised technician. Electrical connection Cleaning the hood WARNING: Failure to remove oil/grease (at least once a month) could result in fire. Use a soft cloth with a neutral detergent. Never use abrasive substances or alcohol. Before using the hood Please read these instructions carefully and keep them for future reference, in order to ensure best use of your hood. The packing materials (plastic bags, polystyrene, etc. ) are a potential source of danger and must be kept out of the reach of children. Make sure the hood has not been damaged during transport. Before calling the After-Sales Service 1. [. . . ] 2); to do so, pull the spring release handle (f1) then remove the filter/s (f2). Carbon filter maintenance Fig. 2 (for models with filter installation): The carbon filter must be washed once a month in a dishwasher at the highest temperature, using a normal dishwasher detergent. It is advisable to wash the filters separately. After washing, reactivate the carbon filter by drying it in the oven at 100° C for 10 minutes. [. . . ]