User manual WHIRLPOOL HDD W00 S INSTRUCTION FOR USE

[. . . ] Technical data Environmental concerns IKEA GUARANTEE 9 10 1 1 1 1 Before first use Your safety and that of others is paramount. Remove cardboard protection pieces, protective film and adhesive labels from accessories. Check the appliance for any transport damage. To avoid any damage do not place any weights on the appliance. [. . . ] The hood should be installed away from particularly dirty areas, windows, doors and heat sources. The hood is sold with all necessary components for installation on most types of walls or ceilings. However, ask a qualified technician to check that the items supplied are suitable for the type of wall/ceiling. Keep this booklet for future consultation. 2 4 3 4 5 Control panel A Light switch: move right to switch the light on. B Suction power selection switch: move right to switch on and to select the desired power/speed 0 1 0 1 2 3 A B Cleaning and maintenance WARNING: - Never use steam cleaning equipment. - Disconnect the appliance from the power supply. iMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth. € Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. iMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. € Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions. IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals. To clean the grease filter The metal grease filter has an unlimited life and must be washed once a month by hand or dishwasher at low temperature and with a short cycle. With cleaning in a dishwasher ENGLISH 8 the grease filter may become dull; this does not effect its filtering capacity. Unplug the appliance or disconnect the power supply. Remove the grease filters: pull the spring release handle, then remove the filter downwards. After cleaning the grease filter, remount in reverse order ensuring the entire extraction surface is covered. Replacing the Halogen lamps WARNING: - Only use 20W MAX - G4 halogen lamps. Disconnect the hood from the electric power supply. Insert the blade of a small flat screwdriver where indicated by the three points, and with a gentlepressure remove the light cover from its position. [. . . ] € Repairs caused by installation which is faulty or not according to specification. € The use of the appliance in a nondomestic environment i. If a customer transports the product to his home or another address, IKEA is not liable for any damage that may occur during transport. However, if IKEA delivers the product to the customer’s delivery address, then damage to the product that occurs during this delivery will be covered by IKEA. [. . . ]