User manual WHIRLPOOL HO EV G INSTRUCTION FOR USE

[. . . ] WARNING: Respect the minimum installation distance from burners, indicated in the installation handbook. If the installation instructions for the gas cooker specify a greater distance, this must be taken into account. Contient également les instructions et prescriptions pour une installation sûre Avant de monter ou d’utiliser la hotte, lisez et suivez attentivement les instructions reportées dans le présent manuel et dans la notice d’installation jointe. AVERTISSEMENT : Respecter la distance minimum d’installation par rapport aux feux indiquée dans le manuel de montage. [. . . ] Packing Packing materials are 100% recyclable and are marked with the recycling symbol . Comply with the local regulations for disposal. The packing materials (plastic bags, polystyrene, etc. ) are a potential source of danger and must be kept out of the reach of children. Product This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is correctly scrapped, the user can help prevent potentially harmful consequences for the environment and the health of people. The symbol on the product or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to a suitable collection centre for the recycling of electrical and electronic equipment. Disposal must be carried out in compliance with local regulations on waste disposal. For further information on the treatment, recovery and recycling of this product, contact the competent local office, the household waste collection service or the shop where you purchased the appliance. WARNING: To reduce the risk of accidents, electric shock, injury or damage, when using the hood comply with the basic precautions, including the following. Always disconnect the hood from the power supply before carrying out any installation or maintenance operation on the appliance. Installation must be carried out by a specialised technician, in compliance with the manufacturer’s instructions and local safety regulations. Earthing of the appliance is compulsory. Never use multisockets and extension leads. Switch the appliance off and then on again to check if the problem has been eliminated. If the problem persists, contact the After-Sales Service. Specify: • the type of fault, • the product model given on the dataplate inside the hood, visible on removing the grease filters, • your full address, • your telephone number and area code, • the Service code (the number under the word SERVICE on the dataplate inside the hood, behind the grease filter). If any repairs are necessary, contact an authorised Service Centre (to ensure the use of original spare parts and correct repair). Failure to comply with these instructions can compromise the safety and quality of the product. AFTER-SALES SERVICE Declaration of conformity This product has been designed, manufactured and put on the market in conformity with: - safety objectives of the “Low Voltage” Directive 2006/95/EC (which replaces 73/23/EEC as amended) - protection requirements of “EMC” Directive 89/336/EEC amended by Directive 93/68/EEC. Troubleshooting guide If the hood does not work: • Is the plug properly inserted in the power socket?If the hood is not extracting enough: • Is the right speed selected?• Do the filters need cleaning or replacing?If the lamp does not work: • Does the lamp need replacing?• Is the lamp correctly fitted? 5019 618 33100/A D GB F NL E P I GR S N DK FIN PL CZ SK LI29WA H RUS BG RO The hood is designed for use in “Filter version” Filter version (see symbol in the installation handbook) Air is filtered through the carbon filter/s and recycled into the surrounding environment. Important: Make sure air recirculation occurs without hindrance (therefore, carefully follow the instructions given in the installation handbook) Important!If the hood does not have the carbon filter/s, it/they must be ordered and fitted before use. [. . . ] Clamp the carbon filter with the special metal catches. Reinsert the grease filter complete with carbon filter. Fitting the carbon filter: 6 4 3 3 1 5 2 1. 9. Control panel Grease filter Light Inside light Steam deflector Aesthetic pattern Support cables Interconnection cable Boss Fig. 1 1. Disconnect the hood from the power supply. [. . . ]