User manual WHIRLPOOL HO EV W INSTRUCTION FOR USE

[. . . ] D Betriebs- und Wartungshandbuch Enthält auch Anweisungen und Vorschriften für die sichere Installation Lesen Sie die vorliegenden Anweisungen und das beiliegende Installationshandbuch vor der Installation oder dem Gebrauch der Abzugshaube aufmerksam durch und befolgen Sie sie. WARNUNG: Berücksichtigen Sie bei der Installation den Mindestabstand von den Flammen, wie im Installationshandbuch angegeben. Schreiben die Installationsanweisungen des Gaskochfelds einen größeren Abstand vor, ist dieser natürlich zu beachten. Also contains instructions and rules for safe installation Before installing or using the hood, carefully read and follow the instructions given in this handbook and in the enclosed installation handbook. [. . . ] Earthing of the appliance is compulsory. Never use multisockets and extension leads. The electrical components must no longer be accessible to the user after installation. Do not touch the hood with wet parts of the body or use it when barefoot. Therefore, make sure the room is adequately ventilated. Do not leave pans unattended when frying, since the cooking oil could catch fire. Make sure the lamps are cold before touching them. The hood is not a shelf, therefore do not overload or place objects on it. Do not use or leave the hood without its lamps correctly installed - risk of electric shock. Wear work gloves for all installation and maintenance operations. The product is not suitable for outdoor use. The air sucked by the hood must not be eliminated through the same flue of the heating system or other appliances using gas or other fuels. 5019 618 33100/A D GB F NL E P I GR S N DK FIN PL CZ SK LI29WA H RUS BG RO The mains voltage must match that given on the rating plate located inside the hood. If provided with a plug, connect the hood to a socket complying with the current regulations and located in an accessible area. If it does not have a plug (direct connection to the power supply) or if the plug is not in an accessible place, fit a suitable double-pole switch that ensures complete disconnection from the power supply in category III overvoltage conditions, complying with the installation rules. WARNING: Before reconnecting the hood circuit to the power supply and checking correct operation, always make sure the power cable is correctly fitted and that it was NOT crushed in its housing during installation. Make sure to have this operation carried out by a specialised technician. Electrical connection Cleaning the hood WARNING: Failure to remove oil/grease (at least once a month) could result in fire. Use a soft cloth with a neutral detergent. Never use abrasive substances or alcohol. Before using the hood Please read these instructions carefully and keep them for future reference, in order to ensure best use of your hood. The packing materials (plastic bags, polystyrene, etc. ) are a potential source of danger and must be kept out of the reach of children. Make sure the hood has not been damaged during transport. Before calling the After-Sales Service 1. Check to see if you can fix the problem yourself (see “Troubleshooting Guide”). Switch the appliance off and then on again to check if the problem has been eliminated. [. . . ] Only use halogen lamps 20W max GU4 - 12V - Ø 35mm - 30° - Dichoric, taking care not to touch them with hands. Lamp maintenance Replacing the inside lamps Grease filters: Pull the pattern downwards and unscrew the damaged lamp; only use 40W max (E14) olive-shaped lamps. The metal grease filter has an unlimited life and must be cleaned once a month by hand or in a dishwasher at a low temperature and with a short cycle. Cleaning in a dishwasher may cause discolouring of the grease filter, but its filtering efficiency is unaffected. Disconnect the hood from the power supply. [. . . ]