User manual WHIRLPOOL KD2178AUU/A01 PROGRAM CHART

[. . . ] Fan with filter (if present), see specific instructions for filter. B. Ice cube tray (inside the compartment) 2. [. . . ] Grille (inside compartment) Note: The number of shelves and type of accessories may vary, depending on the model. All shelves, door trays and racks are removable. Important: Refrigerator accessories must not be washed in a dishwasher. D GB F NL E P I GR S N DK FIN CONTROL PANEL DESCRIPTION B A C F G H E D A. If the letter “A” flashes on the display, contact the After-sales Service. Temperature Selection Button (+3, +4, +5, +6, +7°C) D. To deactivate the “Child Lock” function repeat the same procedure, long-pressing buttons F and D at the same time. REFRIGERATOR COMPARTMENT TEMPERATURE ADJUSTMENT The appliance is normally factory set for operation at the recommended temperature of +5°C. To adjust the internal temperature between +3°C and +7°C, proceed as follows: • Press button C once to adjust the internal temperature: the digital display will flash, showing the previously set temperature. • Each time the button is pressed, the temperature setting is changed by 1°C: the value (between +3°C and +7°C) flashes in sequence on the display. • Approximately 5 seconds after the button has been pressed for the last time, the set temperature is stored and the digital display stops flashing. • The temperature of the freezer compartment (approx. [. . . ] • Approximately 5 seconds after the button has been pressed for the last time, the set temperature is stored and the digital display stops flashing. • The temperature of the freezer compartment (approx. [. . . ]