User manual WHIRLPOOL KGEE 3239 A BR PRODUCT FICHE

[. . . ] It is advisable to keep the fan active, so that the "6th Sense Fresh Control"/ "Green Intelligence ProFresh" function can work properly and also when the ambient air temperature is above 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions. Note Do not obstruct the air intake area with food items. To guarantee the right performance at lower ambient temperature (colder than 18°C) and to minimize Energy Consumption, turn off the fan. To turn off the fan press the button (1a). [. . . ] To manually deactivate the function, press the Freezer °C and Reset buttons for 3 sec. : you will hear a long acoustical signal as confirmation that the feature has been deactivated. The function can be reactivated by repeating the same procedure: you will hear double acoustical signals as confirmation that the feature has been activated. In the event of an interruption in electricity or exit from Stand-by to normal mode, the "6th Sense Fresh Control" / "Green Intelligence ProFresh" status resets to default i. e. Smart Display This energy saving feature allows to reduce power consumption by automatically turning off the display when not in use. To activate the Smart Display, press Fridge °C and Freezer °C buttons at the same time for 3 seconds until the acoustic signal sounds. After the Smart Display activation, the display goes off, except the "6th Sense Fresh Control" / "Green Intelligence ProFresh"icon (and the alarms, if any). To adjust temperature or use other functions, it is necessary to activate the display by pressing any button. After about 15 seconds without any action, the display will go off again, with the "6th Sense Fresh Control" / "Green Intelligence ProFresh" icon remaining visible. To deactivate the function, press Fridge °C and Freezer °C buttons at the same time for 3 seconds until the acoustic signal sounds. The display will come back to the normal visualization. Smart Display function is automatically disabled after Black-out. Failure1, Failure 2, etc. . . ) call After-sales Service and specify the alarm code. The acoustic alarm sounds, the Alarm icon lights up and the 3 central LEDs in the Fridge Temperature LEDs blinks according to failure code described below: Failure code Error 2 Error 3 Error 6 Legend: Led off Visualization RC & FC Set points blink on/off at 0, 5 sec. Blinks ON 2 times then remain off for 5 seconds. RC & FC Set points blink on/off at 0, 5 sec. Blinks ON 3 times then remain off for 5 seconds. RC & FC Set points blink on/off at 0, 5 sec. Blinks ON 6 times then remain off for 5 seconds. Led flashing x2 x3 x6 Door open alarm The Alarm icon lights up blinking and the acoustic alarm sounds. The alarm is activated when the refrigerator's door is left open for more than 2 minutes. Close the door to disengage the alarm, or press once Reset button to mute the acoustic alarm for 2 minutes. If the door is not closed, the acoustic alarm will sound again after two minutes. [. . . ] Before carrying out any cleaning or maintenance operation, unplug the appliance or disconnect it from the power supply. Black Out Alarm In the event of an interruption in electricity, your product is designed to automatically monitor the temperature in the freezer when electricity is resupplied. If the temperature in the freezer rises above freezing level, the Black Out icon lit, & the Alarm Icon blinks and the acoustical alarm sounds when electricity is re-supplied. To reset the alarm press the Reset button just once. In case of Black Out Alarm, the following actions are recommended: D GB F NL E P I GR S N DK FIN PL CZ SK H RUS BG RO UKR CA PRODUCT SHEET DEFROSTING THE REFRIGERATOR COMPARTMENT Refrigerator compartment defrosting is completely automatic. [. . . ]