User manual WHIRLPOOL KGIE 3429 A LH PRODUCT FICHE

[. . . ] Disabling the fan optimizes energy consumption. Vacation This function can be used during extended absences. Press and hold the "Fridge °C" button for 3 seconds to enable/disable the function. The display will show the refrigerator compartment temperature (+12°C). On activating the function, remove all food from the refrigerator compartment and keep both doors closed: the refrigerator will maintain the right temperature to prevent odours from forming. [. . . ] The freezer remains enabled. Refrigerator Compartment A. Fan and anti-bacterial and anti-odour filter (depending on model) B. Bulb or LED light (depending on the model) C. Lid for Special Box ("Meat &Fish" or "Zero Degrees") (if included) F. Special Box ("Meat & Fish" or "Zero Degrees") (if included) G. Rating plate (at the side of crisper drawer) L. Bottle bin Least cold zone Intermediate temperature zone Coldest zone Fruit and vegetable crisper Freezer Compartment M. Upper basket or door (freezer compartment) N. Middle and lower baskets (storage area for frozen and deep-frozen food) O. It is a design feature to prevent condensation from forming. The control panel won't do anything: Every time a key is pressed, The "Key Lock" "CL" or "LO" appear on one or both displays. function has been enabled. Disable the function as explained in the Quick Start Guide. The red indicator lamp will light up (if not previously disabled). Temperature Alarm Freezer Compartment and a beep will sound The temperature alarm indicates that the temperature in the compartment is not ideal. This can happen: When it is first used after defrosting and/or cleaning, when freezing large quantities of food or when the freezer door doesn't close properly. Malfunction Alarm The alarm indicates that a technical component has malfunctioned. Blackout Alarm (where provided) This alarm activates when there has been an extended power failure causing the freezer compartment temperature to rise. The value flashing on the freezer display is the highest temperature reached during the power failure. Antibacterial and anti-odour filter exhausted (if installed). Replace the antibacterial filter. Press the mute acoustic alarm button to switch off the sound signal. The red indicator lamp goes off automatically when an optimal temperature has been reached. If the temperature alarm persists, contact an authorized After-Sales Service. The red indicator lamp is flashing, there are letters on the single display, and a buzzer is sounding (if not previously disabled). [. . . ] If the temperature alarm persists, contact an authorized After-Sales Service. The red indicator lamp is flashing, there are letters on the single display, and a buzzer is sounding (if not previously disabled). A buzzer sounds, and the freezer temperature display and the red indicator lamp (if installed) flash. Call an authorized After-Sales Service. Press the mute acoustic alarm button to switch off the sound signal. Press the mute alarm button to switch off the acoustic signal. Check the state of foodstuffs before consuming them. Read the user handbook carefully before using the appliance. [. . . ]