User manual WHIRLPOOL KGNA 3601 INSTRUCTION FOR USE

[. . . ] Remove the filter and dispose as a whole (grate box + insert). Replace the filter and the grille with the new ones. The replacement procedure is attached with the filter. [. . . ] Our After-sales Service can supply this type of filter. HOW TO OPERATE THE REFRIGERATOR A. Plastic “Dual” shelf (depending on the model) 2. Cooler compartment (depending on the model) 5. Ice tray and / or cold accumulator (depending on the model) 12. Storage basket for frozen food items 14. The freezer door trays for pizza or other frozen products with short storage time (depending on model) C. Light switch off button (depending on the model) D. Internal controls Anti-bacterial protection (depending on the model): 4. Door seals Notes: • The crisper(-s) and the door seals are manufactured from materials that inhibit bacterial growth. Remove the bulb pulling it out of the holder (do not rotate). Check the bulb and replace (if necessary) by pushing its terminals into the holder sockets until it stops. The appliance is equipped with a special push-in light bulb. This bulb is available only from our After-sales Service. Do not leave uncovered bulb. Care and Maintenance When cleaning, especially with the light cover removed, take special safety precautions and do not touch the light bulb. • When the appliance is plugged in, the freezer compartment switches on automatically. Attention: • There is no need to adjust the thermostat knob as it is factory set to ensure the correct storage temperature for frozen foods in the freezer compartment at ambient temperatures between +20°C and +25°C. • After switching on, the freezer compartment takes approximately 3 hours to reach a suitable temperature for frozen food storage. To adjust the internal temperature (if necessary): Turn the thermostat control knob (1): - Towards position Min/1 for less cold internal temperatures. [. . . ] To adjust the internal temperature (if necessary): Turn the thermostat control knob (1): - Towards position Min/1 for less cold internal temperatures. - Towards position Max/3 for colder temperatures. - To position to use the fast freeze function. [. . . ]