User manual WHIRLPOOL KRSC 9065 PRODUCT FICHE

[. . . ] Note: remember that this operation does not disconnect the appliance from the power supply. Freezer temperature To change the temperature press the freezer temp button until the desired value is reached. The selected temperature will start flashing and then come on permanently, within 5 seconds, on the display. Refrigerator temperature To change the temperature press the fridge temp button until the desired value is reached. [. . . ] The function will activate and deactivate automatically. Antibacterial filter (depending on model) This symbol shows the condition of the antibacterial filter. When switching on the appliance for first use, the filter icon shows three dashes. In time their number will decrease, depending on the use of the appliance and the natural wear of the filter charge itself. When all the dashes disappear and the icon starts flashing, the filter needs replacing. Replace the cartridge and press the OK button until the three dashes reappear on the display. Water filter (depending on model) This symbol indicates the state of the water filter. When switching on the appliance for first use, the filter icon shows three dashes. In time their number will decrease, depending on the use of the appliance and the natural wear of the filter charge itself. When all the dashes disappear and the icon starts flashing, the filter needs replacing. Replace the cartridge and press the OK button until the three dashes reappear on the display. To deactivate the function, carry out the same procedure until the symbol goes off. Note: this function does not disconnect the power to the appliance, ice-maker or light, but simply deactivates the dispenser levers. Vacation This function deactivates the refrigerator compartment if the user is going away for sometime. This function is activated by pressing the menu button until the vacation symbol appears. The symbol flashes and the refrigerator compartment temperature disappears from the display. To reactivate the refrigerator compartment, repeat the operation. After activating the function, remove perishable food from the refrigerator compartment and keep the door closed, since the refrigerator maintains an adequate temperature for preventing the formation of odours. Note: when selecting a function, a 5 seconds interval is given to the user to press the OK button to confirm the function. Otherwise the user will have to start the procedure again by pressing the menu button. Eco mode This optional function can be used to save energy. It is important to remember that this function does not disconnect the appliance from the power supply. [. . . ] It is important to remember that this function does not disconnect the appliance from the power supply. To activate it press the "Fridge temp" and then the OK button. Keep both buttons pressed for approximately 5 seconds until the display goes off completely. When trying to use the control panel (opening doors or using the water and/or ice delivery control levers) while this function is on, the display will show the message ECO to warn the user of the current operating condition. [. . . ]