User manual WHIRLPOOL MJD 9000 WH PROGRAM CHART

[. . . ] Electric indicator on control panel (if provided). Refer to the dishwasher loading instructions. Select, save, and supply the detergent Check the rinse aid level Check the regeneration salt level Load the racks Close the dishwasher door, turn on the water tap Select a programme The last programme selected will light up. Select the desired programme (using the specific button or knob). The corresponding indicator lamp lights up. [. . . ] The rack must be level on both sides. B A C D D Retainer open Retainer closed Removing the top rack to provide clearance for large items of crockery in the bottom rack: Open the rack guide retainers (E) on the right and left and remove the top rack. When the upper rack is in place the retainers must always be closed. E E Lower rack: Depending on the model with fixed, tilting (F) or tilting split plate holders (G). Half Load: Load the lower rack (see description of Options). Greater washing power, particularly for plates and saucepans. F F H Power Clean load Increased wash power in the dedicated area (H) and high flexibility for lower rack loading. G Cutlery basket (I): Grid (J) to keep items separate. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the sharp end facing downwards. J I C Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, tin, hand-decorated crockery (unglazed), silver cutlery. What to do if. . . If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see also the corresponding chapter in the user instructions). Problem The appliance is not working Cause • No water supply. • The appliance does not load sufficient water. • Open the tap. Remedy • Clean the water supply tap filter. • Ensure there are no kinks in the water hose. • • • • Insert the plug into the mains socket. Check the safety circuit breaker. • Starting the selected programme. • The programme can be set to “0” to start. • Arrange crockery so that items do not touch each other. • Follow recommended detergent dosage. • Select a more intense wash cycle. • The spray arms must be able to turn freely. • Remove any impurities obstructing the water flow *. If crockery is not perfectly dry • Insufficient rinse aid. • Residual water in cavities. If crockery is not perfectly clean • The water jet does not reach the crockery. • Spray arm nozzles clogged. • Incorrect detergent/detergent too old. • Use a good quality detergent. Sandy or grainy residues • Clogged filters. • Filters incorrectly assembled. • Check filters regularly/if necessary clean *. [. . . ] Switches off when the programme starts and indicates the time remaining in hours and minutes. “F Identification of faults for service technician . . . . ” Time and failure display “Delayed start” button Indicators Add rinse aid Detergent light No light = detergent in powder or The symbol lights up = tablets 2 in 1 or The symbol lights up = tablets 3 in 1. . . . X in 1 (For adjustment refer to “How to use the appliance”) The wash cycle can be programmed to start after 1 - 24 hours. With each successive touch of the button, the delayed start indicator increases by 1 hour, and after 24 returns to 00. [. . . ]