User manual WHIRLPOOL MT 242 INSTRUCTION FOR USE

[. . . ] The indicator lamp lights up when a humidity controlled program is selected, to indicate the working protection function. Function is not active in time controlled programs and Airing . 5 kg Overdry protection Airing - - - Airing Laundry is aired and refreshed for 30 minutes without heating. - Airing PROGRAMME SEQUENCE INDICATORS Lit: Overdry protection is Overdry working Protection Dr ying Completes drying or dries single items (suitable for all fabrics). [. . . ] - Airing PROGRAMME SEQUENCE INDICATORS Lit: Overdry protection is Overdry working Protection Dr ying Completes drying or dries single items (suitable for all fabrics). Check that all fastenings are closed and that pockets are empty. Place laundry loosely in the drum to make sure it doesn’t become tangled. Sort laundry as follows: A) By care symbols (on the collar or inside seam): Suitable for tumble drying Tumble drying with reduced drying intensity only. Do not tumble dry B) By amount and thickness/weight Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e. C) By type of fabrics Cotton/linen: Towels, cotton jersey, bed and table linen made of cotton or linen. synthetics/Easy Care: Blouses , shirts , overalls , etc. Made of polyester or polyamide, as well as cotton/synthetic mixes. D) By drying level • Sort into: iron dry, cupboard dry, etc. Do not tumble dry: Woollens, silk, nylon stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc. Lint filter or water container indicator lamp light on: • • • • • • • • Is the lint filter clean?Has any fluff on the heat exchanger seal been wiped away?Has any fluff on the door seal been wiped away?Having selected the desired programme and options, press the Start/Pause button. If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing. On completion of the programme, set the programme selector knob to position “0”. CHANGING A PROGRAMME When changing the programme during the drying cycle, the dryer stops. the drying indicator lamp is blinking “ “. To operate the new programme, press the Start/Pause button. [. . . ] the drying indicator lamp is blinking “ “. To operate the new programme, press the Start/Pause button. INTERRUPTING A PROGRAMME To interrupt the dryer during operation 1. Wait at least 5 minutes before opening the door to allow the dryer to cool down. [. . . ]