User manual WHIRLPOOL MT 267/BL INSTRUCTION FOR USE

[. . . ] Any functional fault must be reported to IKEA After Sales Service as soon as possible. Wait at least two hours before switching the appliance on, to ensure that the refrigerant circuit is fully efficient. The electrical installation and the electrical connection must be carried out by a qualified technician according to the manufacturer's instructions and in compliance with the local safety regulations. Clean the inside of the appliance before using it. [. . . ] € Reposition the removable water dispenser (if present), ensuring your hands are hygienically clean. € Periodically clean the ice bucket or drawer under running water only. € Every six months, sanitize the water and ice dispenser system using a food grade disinfectant solution (with sodium hypochlorite) which does not taint the appliance materials. € Replacement of any parts of the ice and water dispenser must be carried out using original spare parts provided by the Manufacturer. € Any work on the appliance must be carried out by a qualified technician or the After-sales Service. ENGLISH 6 Product description Carefully read the operating instructions before using the appliance. 1 1 Control panel 2 Top drawer 3 Bottom drawer Notes: The number and shape the of accessories may vary according to the model. With the exception of the vertical glass separator, all accessories can be removed. caution: The refrigerator accessories must not be placed in a dishwasher. 2 3 Accessories Bottle rack Trays Milk / fruit juice cartons compartment 1x 2x 1x Control panel 4 1 2 3 4 Thermostat control knob Appliance “On” warning light “Tropical” function yellow light “Tropical” function button 3 2 1 Temperature adjustment To change the temperatures in the compartments, turn the thermostat setting knob: • on the lowest numbers, 1-2 (MIN) for the LEAST COLD temperature; • on the highest numbers, 3-4 (MAX), for the COLDEST temperature. Important: The fan will ONLY operate when the compressor is on and the upper drawer is closed. Switching the refrigerator off Rotate the thermostat knob (1) on : the appliance is switched off and the green LED (2) goes off. To switch the refrigerator back on rotate the knob (1) clockwise. €Tropical” function (removes condensation) This function is used in case of condensation on the drawers seals. Press the button (4) and the yellow LED (3) will come on. To deactivate the function press the same button (4) again. Cleaning and maintenance Before carrying out any cleaning or maintenance operations, switch the appliance off by pressing button (1) on , then unplug or disconnect the appliance from the power supply. Cleaning the refrigerator Refrigerator defrosting is completely automatic. Droplets of water on the back wall behind the drawer, indicate that the automatic defrost phase is in progress. The defrost water is automatically run into a drain hole and collected in a container, where it evaporates. Clean the defrost water drain hole regularly using the tool supplied, in order to ensure the constant and correct flow of defrost water. Important • The vertical glass separators inside the drawers are part of the structure and should not be removed. [. . . ] The above procedure should be followed for both baskets. Note: in high humidity conditions (normal during the summer months or in extremely humid environments), external condensation could appear on the lower drawer seals. Using a soft cloth, remove this condensation on the seals and if necessary on the front of the drawer, and activate the “Tropical” function (4) on the control panel. The function is activated when the yellow light (3) is on. [. . . ]