User manual WHIRLPOOL MT 744/WH INSTRUCTION FOR USE

[. . . ] The power cable must be long enough for connecting the appliance, once fitted in its housing, to the power supply socket. Do not pull the power supply cable in order to unplug the appliance. The electrical components must not be accessible to the user after installation. Do not touch the appliance with any wet part of the body and do not operate it when barefoot. [. . . ] € The hood is not a work surface, therefore do not place any objects on top of it or overload it. € During all installation and maintenance operations wear appropriate working gloves. € This appliance is not suitable for outdoor use. € When the hob is in use, accessible parts of the hood may become hot. Installation and connection After unpacking the appliance, check for any transport damage. In the event of problems, contact the After-sales Service. To prevent any damage, only remove the appliance from its polystyrene foam packaging at the time of installation. Preparing for installation WARNING: this is a heavy product; the hood should only be lifted and installed by two or more people. The minimum distance between the hob and the bottom part of the hood must not be less than 65 cm for burning gas or other fuels and 50cm for electric cookers. Before installation also check the minimum distances stated in the manual of the cooker. If the installation instructions for the cooker specify a greater distance between cooker and hood, this distance must be observed. Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions. Perimeter suction panel The suction panel must be cleaned with the same frequency as the grease filter. Use a damp cloth and a soft liquid detergent. do not use products containing abrasives. DO NOT USE ALCOHOL The panel normally covers the grease filters, and must therefore be opened each time access to the grease filters and the inside of the hood is required (e. Opening: Pull the panel (LEFT SIDE for 60 cm hood or FRONT SIDE for 80 cm hood) downwards. Closing: The panels must be fixed to the appropriate pins on the surface of the hood. wARNING: Always check that the panel is fitted properly. To clean the grease filter The metal grease filter has an unlimited life and must be washed once a month by hand or dishwasher at low temperature and with a short cycle. With cleaning in a dishwasher the grease filter may become dull; this does not effect its filtering capacity. ENGLISH 9 Replacing the halogen lamps WARNING: - Only use 12V 10W 30° Ø35 12V GU4 halogen lamps. [. . . ] eNGLISH 12 Disposal of packing The packing material is 100% recyclable and is marked with the recycle symbol . The various parts of the packing must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal. Scrapping the product - This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). - By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ]